Before you actually begin to tap coat it with a liberal amount of grease to catch all the metal shavings that will be cut. You dont want then floating around in your engine!! While starting the tap, be sure to keep it straight! It should be pretty easy to turn once you get started. I ran it all the way down but if I had to do it again, I would have stopped about 3/4ths of the way and test fitted the fitting.
Here is the final product!! I applied alittle extra silicon around the edges to help seal it so there wasnt any chance of a oil leak. After applying the silicon, it is recomenend to let it set up for 24 hours.
