http://www.mpu51.com
01/10/2008
http://www.geocities.com/mpu51/
skip Willem eprom Progarmmer page
http://se-ed.net/mpu51/eprom/eprom.html (Thailand) 10/06/2004)
http://mpu51.tripod.com/ 31/07/2003
Update
|
|
01/10/2008 |
- Update prog for Windows Ver. 0.98D9 |
27/05/2004 |
- Update prog for Windows Ver. 0.97j |
15/09/02 |
- Add PCB adapter FWH (SMT socket) & change D5 ->LED |
09/09/02 |
- Update prog for Windows Ver. 0.97b+ |
06/09/02 |
- Update prog for Windows Ver. 0.97a |
24/08/02 |
- Fixed Error PCB(A10) adapter FWH/LPC (report error by ahmet ) |
02/07/02 |
- Update prog for Win 9x Ver. 0.96C |
18/06/02 |
- Update prog. for Win 9x Ver. 0.96A |
11/05/02 |
- Update prog. for Win 9x ver. 0.95C |
24/04/02 |
- Fixed bug schematic SCH3B.zip |
26/02/02 |
- Add adapter PIC 28/40PIN ( 16F870/871/872/873/874/876/877 ) |
23/02/02 |
- Update prog. for Win 9x ver. 0.94A |
11/12/01 |
- Update prog. for Win 9x ver. 0.94 |
23/11/01 |
- Update prog. for Win 9x ver. 0.93F+ |
03/11/01 |
- Update prog. for Win 9x ver. 0.93E |
Support CHIPS (EPROM,EEPROM,FLASH,I2C,PIC,MCS-51,AVR, 93Cxx)
SPI FLASH | WINBOND MXIC EON AMIC pFLASH Numonyx (ST) SPANSION ATMEL |
EPROM |
27C64, 27C128, 27C256, 27C512, 27C010, 27C020, 27C040,27C1001 |
EEPROM | 28C65,28C64, 28C128, 28C256,28C512,
28C010, 28C020, 28C040 M28C16A/17A (DIP28) (Adapter or Jumper) 28C16,XLS2816 (DIP24) |
FLASH Memory |
28F64, 28F128, 28F256, 28F512,28F010(MX28F1000), 28F020 |
Command seq. 555/AA,2AA/55,555/90 29F64, 29F128, 29F256, 29F512,29F010, 29F020, 29F040 |
|
Serial (I2C) EEPROM 24Cxx |
24C02,24C04,24C08,24C16,24C32,24C64,24C128,24C256,24C512 |
Microwire EEPROM 93Cxx |
<------ Data 8bit ----->
(pin 6 ->ORG. [Schematic connect to GND]) |
MicroChip PIC |
16C84, 16F84, 16F84A ,16F627/16F628 |
Atmel Flash Memory |
AT29C256, AT29C512,AT29C010A, AT29C020, AT29C040,AT29C040A ASD AE29F1008 (AT29C010), AE29F2008 (AT29C020)
|
Atmel Flash Memory |
Command seq. 5555/AA, 2AAA/55, 5555/A0 |
Serial Peripheral Interface (SPI) |
[Atmel] AT25010,020, 040 (A8-A0) |
Atmel EEPROM (page prog.) |
AT28C256, AT28C010, AT28C040 |
Nonvaltile SRAM (DS12xx) | DS1220,DS1225Y, DS1230Y/AB, DS1245Y/AB, DS1249Y/AB |
static RAM (Test RAM) |
6116, 6264, 62256, 62512, 628128 |
EPROM winbond,SST |
W27E512, W27E010, W27C010, W27C020, W27C040 SST27SF256, SST27SF512, SST27SF010, SST27SF020 |
Flash Memory SST,Sanyo |
SST28SF040A ,LE28F4001 |
|
Adapter |
Atmel AT89Cxx (MCS-51) |
Atmel Auto Setect |
MCS-48,MCS-41 |
ROM (read/verify) OTP (read/verify/Progam) EPROM
(read/verify/Progam) |
FLASH memory 8/16bit (Software Data Protection) Adapter (TSOP48) |
Am29F400,Am29F800,29F160,29F320 (read,write
byte mode) HY29F200, HY29F400, HY29F800 |
FLASH memory 8/16bit (Vpp12V)
(Software Data Protection) Adapter (TSOP48) |
i28F200,i28F400,i28F800 28F001 |
Atmel RISC mcu AVR AT90Sxxx |
(read,write,erase,verify,checkempty) [Flash memory] |
EPROM 16bit (DIP40) (1-4Mbit) Adapter Eprom 16bit Eprom only |
27C1024 (27C210), 27C2048 (27C2002), 27C4096
(27C4002), Schematic by Toomas Toots (read,Program byte mode by use Resister pull up Data Bus (0xFF), A0 select low or high byte) |
EPROM 16bit (DIP42) (4-32Mbit) |
M27C400(DIP40), 27C800, 27C160, 27C322 Schematic by Toomas Toots (read,Program byte mode by use Resister pull up Data Bus (0xFF), A0 select low or high byte) |
FLASH memory 8/16bit (Software Data Protection) Adapter (TSOP48LV) |
29LV400,29LV800,29LV160,29LV320 (read,write
byte mode) |
Firmware Hub / LPC FLASH Adapter Firmware Hub/LPC (PLCC32) (PP mode) (3.3V) |
-- Firmware Hub -- LPC flash |
P28F002BC Adapter P28F002BC (DIP40) |
BOOT BLOCK FLASH MEMORY |