New Pics at the Bottom

V8 240z Conversion

I am starting the frame rebuild on the passenger side from front to back.  I will first replace the engine frame, then the floor pan, then the frame under the floor, then the rocker panel area.

Rebuilding the replacement frame for the engine compartment.

Passenger frame rail after narrowing and welding the pocket.

Passenger floor pan replacement.  Cutting out the old floor.

Fitting in the new floor

Sub-Frame fabrication

Inner Rocker replacement/reinforcement

Original Rocker Panel Design

Cannot do this because the bottom of the outer rocker will interfere with the bottom of the square tubing. 

Proposed subframe and inner rocker scheme.