Instructions for using DRI WASH 'N GUARD® Shake well before and during use. Spray Dri Wash 'n Guard® onto your vehicle's dry, non-porous surface in a shaded area out of direct sunlight. Do only small sections at a time.  Approximately 2' X 2'.  In detailed areas or cracks, spray product on cloth first.  Rub lightly with a soft terry cloth to a dry "filmy" haze, then buff to a shine with another clean soft terry cloth. Dri Wash 'n Guard® goes on extremely easy. You do not have to rub hard, unless you are removing tar, oil, insects, etc. Using your soiled towels, the windows, wheels and tires should be the last to be cleaned on your vehicle. Do NOT mix with water!!! Use common sense.  If your vehicle is extremely dirty, you should remove it by rinsing first.  Do NOT use your Dri Wash 'n Guard® on a wet vehicle.  Dry prior to application.  Ask for a Frequently asked question sheet for other answers.  If you still have questions, please feel free to contact me. Dri Wash 'n Guard®, with exclusive formula PolyGuard-3 is great for boats, fiberglass, motorcycles, aircraft, RVs, snowmobiles, windows, mirrors, bath fixtures, ceramic tie, porcelain, microwave & oven doors, refrigerators, appliances and any other solid, non-porous surface. Michael Koszewnik Director / Independent Distributor PIN # 253937 239-776-7101