Resonator Removeral
Tools:
Phillips' Screw Driver
Excedrin Cap From The Big Bottle
Location Underneth the Air Intake Hose
Steps:
1.) Losen First Clamp Which is located by the Air Mass
2.) Losen 2ed Clamp Which is located by the TB
3.) Remove the intake hose
4.) Turn upside down then remove clamp thats holdin on the resonator
5.) Remove the resonator from the intake hose
6.) Stick Excedrin cap inside the open hole where the resonator was located
7.) Tighten resonator clamp
8.) Replace air intake hose
9.) Tighten Clamps from Step 1 and 2
10.) Enjoy A More Louder Air Intake Flow(You Can Actually Hear It) And *Possiably Slight HP Gain,*More Rev Usage, And *Better Perofrmance
* Hassnt Been Tested Or Proved But Many People Would Swear On Their Lives