Alternator Driven Test Cell (old experiment)

Not really a Meyer test as didn't get around to setting up pulsing circuit. Just proved to myself that electrolysis with enough amps can provide reasonable gas from rain/tap/distilled water - but not enough to run a vehicle using a standard alternator (unless you use a crank mounted high perf alt like Zigouras did). http://s142.photobucket.com/albums/r108/misfitjackie/?action=view&current=Meyeralternatortest.flv


Steam Electrolysis

Once the above Mini Test Cell test plan is complete, a quick reconfig will allow a similar test plan to be run with superheated steam. There may be benefits to be gained by using superheated steam as the disassociation source as opposed to water. A few tests hopefully will prove one way or the other that electrolyzing steam will be easier because it is naturally at a higher energy state to begin with, therefore requiring less energy to effect the disassociation, plus you don't have the problems of different source frequencies, contamination etc. etc. Also, it can be taken to that state by what is normally waste exhaust or cooling heat. 

NOTE: The volume of steam created from one litre of water is very close to the volume of hydroxy created from one litre of water - hmmmm...