|
|
|
|
Peck Polymers
Mini Bell
This Peck Polymers � Mini Bell has been converted to electric power. I wanted a new challenge since the many modifications to my Wattage Lite-Stick did not improve its performance much. I used the component from the Lite Stick which fitted the Mini Bell perfectly. A GWS DXA motor and a 7X6 slow flyer prop provide the thrust.
The target weight per the instructions was between 8 to 10 oz. (Gas Model) The model weights in at 7 3/8 oz including an eight cell, 220 mAh NiMh battery! R.O.G. can be done from a smooth surface. The nose wheel is has functional steering connected to the rudder servo. As usual I used Econokote covering.
|
|
 |
.... |
 |
.... |
 |
| . |
 |
.... |
 |
.... |
 |
| . |
 |
.... |
 |
.... |
.... |
|
Specifications
| Wing Span |
| 25 inches |
| Length |
| 20 inches |
| Weight |
| 7 3/8 oz. |
| Wing Area |
| 100 sq.in. |
| Motor |
| GWS DXA Electric Motor |
| Gearing |
| 1:5.86 |
| Transmitter |
| Futaba 6XA |
| Receiver |
| Hitec Feather |
| Servos |
| Hitec HS-50 |
| Status |
| R.I.P. |
|
|
