| Fiberglass (FRP) Grating: CC-Grate Molded Grating Patterns Available: 1" Thick Patterns: 1-1/2" x 1-1/2" - Square Mesh 1" x 4" - Rectangular Mesh 1-1/4" Thick Pattern: Max-Mesh - 3/4" x 3/4" pattern 1-1/2" Thick Patterns: 1-1/2" x 1-1/2" - Square Mesh 1-1/2" x 6" - Rectangular Mesh Stair Tread Panels 2" Thick Pattern: 2" x 2" Square Mesh Molded grating has historically been a hand lay-up composite of resin and continuous glass fiber strand that is thoroughly wetted out and woven through an open mold. This method leads to a resinous composite which imparts good strength characteristics and high levels of corrosion resistance. The general advantages of molded grating are: � Higher resin content for greater chemical and UV resistance � Resin systems available: o General Purpose-Polyester o Isophthalic-Polyester o USDA Certified o Vinyl Ester � All standard composites are Class I flame retardants per ASTM E-84 testing - Data Available. � Non-conductive � Impact resistant � Low thermal conductivity � Permanent colors for low maintenance � Numerous patterns, panel sizes, and colors are available � Embedded grit or meniscus surfaces for slip resistance The uniformity of depth in the embedded grit surface of CC-Grate brand fiberglass grating imparts an aggressive grit surface for slip resistance, and also adds wear resistance without reducing the glass content which helps limit chipping of the grit surface. |
 |
 |