PAGE 2
Make sure that the cap on your nitro fuel bottle is always tight, or with time, the methanol in the fuel will evaporate. If it is stored in a damp place, fuel attracts moisture; water doesn't burn, so the more moisture there is in the fuel, the less fuel there is to burn when the mixture reaches the combustion chamber. If your fuel is old stuff that has been sitting around for a while, buy a fresh bottle.
I recommend that you change your engine mount screws to hex key heads beacause screw driver head screws slip and if you slip the heads off them you will not get your engine off the chassis.
do not over tighten screws they are only screwing into alluminium
GET A PEICE OF GALVANIZED STEEL MAKE A TEMPLATE OF THE FRONT BIT OF THE CHASSIS AND MAKE A FRONT PEICE AND CUT IT OUT AFTER YOU CUT IT OUT BEND IT UP AND SCREW IT ONTO YOUR CHASSIS.
PUT A PEICE OF PAPER OVER THE BACK PEICE OF THE CHASSIS AND DRAW AROUND IT AND MAKE A TEMPLATE CUT OUT YOUR TEMPLATE AND DRAW IT ONTO A BIT OF GALVANIZED STEEL AND CUT IT OUT AND DRILL SOME HOLES IN IT FOR THE SCREWS.
