               **********************************************************
                SURECOM EP-427X 16bit 100/10M Couplerless PCMCIA Adapter
                                 
                         Driver for Windows XP Installation Guide
               **********************************************************

-----------------------
Installation Procedure 
-----------------------

 1. Plug the adapter into one of the Master PCMCIA slots of your PC.

 2. Power on your PC.

 3. Open Windows XP operating system.

 4. Windows XP will prompt " CouplerlessPCMCIA 100BASE " in " Welcome to the Found New Hardware
    Wizard " dialog box .

 5. Select " Install the software automatically ( Recommended ) " from " Found New Hardware 
    Wizard " dialog box, then click <NEXT> button.

 6. Insert driver disk bundled with " SURECOM EP-427X 16bit 100/10M Couplerless PCMCIA Adapter ".

 7. Enter the driver pathname, then click the <NEXT> button from " Found New 
    Hardware Wizard " dialog box.

    Example :

             A:\WINXP
      
 8. Select your installed adapter - " SURECOM EP-427X 16bit 100/10M Couplerless PCMCIA Adapter "
    , then click the <NEXT> button from the dialog box.

 9. To complete the process, please follow the instructions on the screen.

10. If the message " The software you are installing for this hardware :
 
            " SURECOM EP-427X 16bit 100/10M Couplerless PCMCIA Adapter "
     
     has not passed Windows Logo testing to verify its compatibility with Windows XP.

     Please click < Continue Anyway > button.
 

