To delete routes from the IP routing table, use the clear ip route EXEC command.
clear ip route {network [mask] | * }
network Network or subnet address to remove.
mask (Optional) Subnet address to remove.
* Removes all routing table entries.
All entries are removed.
EXEC
| Release | Modification | 10.0 | This command was introduced. |
|---|
The following example removes a route to network 132.5.0.0 from the IP routing table:
clear ip route 132.5.0.0
Printed for [email protected] on Wed Mar 5 22:32:57 PST 2003
All material in this document copyright 2000 Cisco Systems, Inc. All rights reserved. No material may be reproduced or distributed without written permission of Cisco Systems, Inc.