To return a terminal line to idle state, use the clear line EXEC command.
clear line line-number
line-number Absolute line number.
EXEC
| Release | Modification | 10.0 | This command was introduced. |
|---|
Use this command to log out of a specific session running on another line. If the line uses a modem, the modem will be disconnected.
The following example resets line 3 to idle state:
clear line 3
Printed for [email protected] on Wed Mar 5 22:32:57 PST 2003
All material in this document copyright 2000 Cisco Systems, Inc. All rights reserved. No material may be reproduced or distributed without written permission of Cisco Systems, Inc.