Here is a detailed close up of the turbine housing from the Turbo, fresh from the plating company.

I've added a tape measure to the pics soas to give you an idea of the size of the turbine.

Here is a shot of my new Copperseal gasket as I received it this morning, my thanks again Matt!

This will be going in as well :)

Well.... below is my old torque strap homemade motor mount on the right, compared to the new Energy Suspension inserts installed on the right. To give you an idea what I did to ALL of my motor mounts.

I created the left with a two part liquid casting Urethane which were a PAIN in tha ass to get out.

The ES inserts were a PAIN to get in, 37 minutes with a bench vice, 600 swear words and alot of patience, and they  went in.

As you can see, the ES inserts CLEARLY have move ~GIVE~ than the solid Urethane mount, as evidenced by the "Slots", not to mention they were MUCH softer than the Urethane filled ones...