Here it is, al cleaned up and ready to go. If you are at this stage, make sure you have all gaskets handy before starting, or you'll be making a few trips to the local parts shop.

Intake upper and lower, throttle body, head, exhaust, valve cover, sparkplugs, there is a fitting on the back of the head for coolant, apparently there is no gasket for this. Silicone is what the Dealership recommends.

Head torqued down, rockers are all in place. Make sure these are positioned properly , these things come off rather easily as this motoro uses low pressure springs.

Cams in, engine assembley lube gooped on, check the cams, intake and exhaust.

Front side of the engine, note the Apex tab sticking out from underneath the head..
More pics on the next update.