Current projects
Dean Edge 6 string Bass (2001)
This thing was a beast.  Beautiful guitar though.  Not a whole lot wrong with it but needed a little TLC. 
This shows the frets before polishing.
This was very dirty.  Step one: take the thing apart.
This was taken right after the intonation was set and string height set. 
The Fingerboard needed to be conditioned and all the build-up needed to be removed.  I also buffed the frets out because they were very dull.
Duties Performed:
Complete Rebuild
Cleaned all parts thoroughly
Conditioned/Cleaned Fingerboard
Very Minor Truss Rod Adjustment
Polished Frets
Set Intonation
Set Proper String Height
Tuned -standard
Polished Body/Headstock
Checked Electronics - stripped out
        volume pot will need replacing

Total Time - 2.5 Hours
Visit Dean Guitars
Hosted by www.Geocities.ws

1