| How to Make Your Own Bong |
| Basic "Bottle Bong" Supplies: 1. 20oz pop bottle (this is the chamber) 2. A Marker (this is the shaft) 3. A Socket Wrench Head (this is the bowl) 4. A Sharp Knife or Razor Blade (this is for the cutting you need to do) 5. Silicon or Glue (this is to seal up the cracks to make the bong as air tight as possible) 6. Clay or Somerthing to use as a stand (this is optional and only if the bong won't stand on it's own) 7. A Screen or Tin Foil (this is for the screen) Procedure: 1. First of you want to strip the label of the 20oz pop bottle, then wash it out, and make sure it is clean. You can get rid of the cap it is not needed. 2. Next, open the marker and get rid of the inside, and cap. Cut the front and back of with a kinfe. 3. Put the socket wrench head on one the inside of the marker. Then use the silicon or glue to seal up the openings around the bottom side of the socket wrench ( hot glue isn't good to use it tends to melt when the bowl gets really hot 4. After that use the knife to make a small hole somewhere on the back of the 20oz pop bottle. This will be your carb so make sure the carb is above where the bowl will be, and on the opposite side. 5. Next, use the knife to make a bigger hole, or slit, on the opposite side of the carb for the marker to fit into. Don't make the hole to big, because you want the marker to be held in place. 6. Use the silicon or glue to seal up around the marker. This is to hold the marker in place and seal up any holes that may be around the marker. 7. Now, cut the screen or tin foil to the right size and fit it inside the bowl. Do not use any silicon or glue to hold it into place. Also if you are using tin foil you need to poke a lot of small holes in it. 8. Next see if your bong stands up by itself, if it does then your finshed. If it doesn't you have one more step to go. 9. (optional) Take your clay, or whatever you are using for a stand, and fit it around the base of the bong. Then mold it so that it holds up the bong (and if you want, looks good). Let the clay dry and you are finshed. Note: I personaly have never smoked out of this kind of bong before, but I have a friend that does every time, and it seems to work for him. he does make a new one after about two or three uses. I am not a crafty sort of girl and probably would have some trouble making something like this, but everyone else I talked to said it was easy and if you follow the instruction your good to go. Good Luck! |
| If anyone has a Procedure for how to make any type of home made bong pleae e-mail me. I am also looking for pictures of home made bongs so if you have that or know where I can get it, again please e-mail me or sign the guet book. Even though my e-mail is posted about a thousand time I'll post it again |