CAMPlot
-------

Report Written : Friday, October 24, 2003
Design Path    : D:\PCB\Pulsonix\LPC2104\LPC2104.pcb
Design Title   : 
Created        : 10/19/2003 3:33:24 PM
Last Saved     : 10/23/2003 10:29:16 AM
Editing Time   : 554 min

Formatting Information
----------------------

    Gerber Output
    -------------

    Pulsonix 2.1 Gerber.dll 1660
    3.4 Format Absolute millimetres.
    Omit Leading zeroes.
    G01 assumed throughout.

    Line termination <*> <CR> <LF>.

    Aperture table defined in output file (RS-274-X).

    Hardware arcs allowed.

    Plane Isolation Gap 0.381.
    Thermal Connect Width 0.127.

    Excellon Drill Output
    ---------------------

    Pulsonix 2.1 NCDrill.dll 1680
    3.4 Format Absolute Metric.
    Omit No zeroes.

    Tool sizes are in     mm


Plot Details
------------

    Gerber Output
    -------------

    File : 'D:\PCB\Pulsonix\LPC2104\LPC2104_1.gbr'


    Contains:     Top

    Scale:     1.000
    Mirrored: No
    Rotated: No
    Offset:     -349.212+    -339.046+mm
    Repeat 1 copies in X, step by 0.000mm
    Repeat 1 copies in Y, step by 0.000mm


    D-Code   Description

    D10      Round 0.635
    D13      Rectangle 1.295+ x 1.524 Rotation 90
    D14      Rectangle 1.295+ x 1.321-
    D15      Rectangle 1.295+ x 1.524
    D17      Rectangle 0.700 x 2.600
    D19      Round 2.000
    D70      Rectangle 1.016 x 1.905 Rotation 90
    D71      Round 1.270
    D20      Round 0.305-
    D28      Round 0.127
    D29      Round 0.203+
    D99      Rectangle 1.270 x 1.905 Rotation 90
    D135      Round 3.810
    D144      Round 1.524
    D191      Round 1.010
    D198      Round 1.778
    D199      Round 4.445
    D232      Rectangle 2.200- x 3.500+
    D233      Rectangle 1.100+ x 2.200- Rotation 90
    D234      Round 3.000
    D235      Rectangle 2.032 x 2.413
    D246      Rectangle 0.285 x 1.100
    D247      Rectangle 0.285 x 1.100 Rotation 90

    Gerber Output
    -------------

    File : 'D:\PCB\Pulsonix\LPC2104\LPC2104_2.gbr'


    Contains:     Bottom

    Scale:     1.000
    Mirrored: No
    Rotated: No
    Offset:     -349.212+    -339.046+mm
    Repeat 1 copies in X, step by 0.000mm
    Repeat 1 copies in Y, step by 0.000mm


    D-Code   Description

    D10      Round 0.635
    D19      Round 2.000
    D71      Round 1.270
    D20      Round 0.305-
    D28      Round 0.127
    D29      Round 0.203+
    D135      Round 3.810
    D144      Round 1.524
    D191      Round 1.010
    D198      Round 1.778
    D199      Round 4.445
    D234      Round 3.000

    Gerber Output
    -------------

    File : 'D:\PCB\Pulsonix\LPC2104\LPC2104_3.gbr'


    Contains:     Silkscreen Top

    Scale:     1.000
    Mirrored: No
    Rotated: No
    Offset:     -349.212+    -339.046+mm
    Repeat 1 copies in X, step by 0.000mm
    Repeat 1 copies in Y, step by 0.000mm


    D-Code   Description

    D20      Round 0.305-
    D28      Round 0.127
    D116      Round 0.254

    Gerber Output
    -------------

    File : 'D:\PCB\Pulsonix\LPC2104\LPC2104_4.gbr'


    Contains:     Solder Mask Top

    Scale:     1.000
    Mirrored: No
    Rotated: No
    Offset:     -349.212+    -339.046+mm
    Repeat 1 copies in X, step by 0.000mm
    Repeat 1 copies in Y, step by 0.000mm


    D-Code   Description

    D28      Round 0.127
    D121      Rectangle 1.549+ x 1.575-
    D122      Rectangle 1.549+ x 1.778
    D123      Rectangle 1.549+ x 1.778 Rotation 90
    D125      Round 1.778
    D130      Rectangle 1.524 x 2.159 Rotation 90
    D151      Round 2.254
    D176      Rectangle 0.954 x 2.854
    D187      Round 1.264
    D237      Round 2.032
    D238      Rectangle 2.454- x 3.754+
    D239      Rectangle 1.354+ x 2.454- Rotation 90
    D240      Round 3.254
    D241      Rectangle 1.270 x 2.159 Rotation 90
    D242      Rectangle 2.286 x 2.667
    D243      Round 4.699
    D248      Rectangle 0.539 x 1.354
    D249      Rectangle 0.539 x 1.354 Rotation 90

    Gerber Output
    -------------

    File : 'D:\PCB\Pulsonix\LPC2104\LPC2104_5.gbr'


    Contains:     Silkscreen Bottom

    Scale:     1.000
    Mirrored: No
    Rotated: No
    Offset:     -349.212+    -339.046+mm
    Repeat 1 copies in X, step by 0.000mm
    Repeat 1 copies in Y, step by 0.000mm


    D-Code   Description

    D20      Round 0.305-
    D28      Round 0.127

    Gerber Output
    -------------

    File : 'D:\PCB\Pulsonix\LPC2104\LPC2104_6.gbr'


    Contains:     Solder Mask Bottom

    Scale:     1.000
    Mirrored: No
    Rotated: No
    Offset:     -349.212+    -339.046+mm
    Repeat 1 copies in X, step by 0.000mm
    Repeat 1 copies in Y, step by 0.000mm


    D-Code   Description

    D28      Round 0.127
    D125      Round 1.778
    D151      Round 2.254
    D187      Round 1.264
    D237      Round 2.032
    D240      Round 3.254
    D243      Round 4.699

    Excellon Drill Output
    ---------------------

    File :     D:\PCB\Pulsonix\LPC2104\LPC2104_7.drl

    Contains:     <Through Hole>

    Scale:     1.000
    Mirrored: No
    Rotated: No
    Offset:     -349.212+    -339.046+mm
    Repeat 1 copies in X, step by 0.000mm
    Repeat 1 copies in Y, step by 0.000mm


    Format     2
    Tool sizes included in output.

    Tool             Size        Count

    T001         000.9397	  505
    T002         003.0000	    4
    T003         001.0000	    8
    T004         001.3000	    2
    T005         002.5399	    2
    T006         000.8999	   32
    T007         000.5999	   38

Summary Information
-------------------

    Outputs covered by CAM Plots
    ----------------------------

    Top: Gerber, Artwork, Enabled
    Bottom: Gerber, Artwork, Enabled
    Silkscreen Top: Gerber, Artwork, Enabled
    Solder Mask Top: Gerber, Artwork, Enabled
    Paste Mask Top: Gerber, Artwork
    Silkscreen Bottom: Gerber, Artwork, Enabled
    Solder Mask Bottom: Gerber, Artwork, Enabled
    Paste Mask Bottom: Gerber, Artwork
    Documentation: Windows, Artwork
    <Through Hole>: Excellon, Drill, Enabled
    Drill Drawing: Gerber, Drill Drawing
    Pin Names: Windows, Artwork

    Outputs not covered by CAM Plots
    --------------------------------

    Layer Wires Top
    Layer Wires Bottom

                ---------------- End Of Report ----------------
