Tips and tricks: Making Joints Without a Hinge

Tips and Tricks:
Making a Joint without a hinge

This section has been a long time coming. It shows you
how to make joints and hinges without joints and hinges.

Here's how you make a brick-hinge:
1. For a girder or brick, put a 1x1 plate on the end: at the top and bottom.
2. The cavity where the hinge will go has to be one brick and two plates high.
3. Place the girder or brick in the corner of the cavity.
4. And top it off with a large plate. This will hold it firmly in place. The larger the plate, the better it will hold. Rampage and Arachnid have legs like these.
== Here's how you make a plate-hinge:
1. the cavity will only be 2 plates high.
2. insert a 1x wide plate in the cavity.
3. Top it with another plate.
4. Add wings or accessories as you see fit. It has more than 90 degrees of motion!

Hosted by www.Geocities.ws