Instruction for building:
Arachnid
Finally, instructions for Arachnid!!.  Making these instructions
wasn't easy.  Arachnid is mostly black so it is hard to photograph.
You will note that I used a drawing program to enhance some pictures.
 E-mail me and vote for the next Legobot you want to see here!

Special note:
Make the legs before you make the body.
A complete set of legs need to be added in the body's construction.


Arachnid Instructions Index
1. Legs 
2. Head
3. Arms
4. Body
  Transformation 


 The Legs (All Eight of Them)

Legs 1 and 2


1. Start with a
1x4 girder, a black
peg, and the two
flat transparent
pieces shown.
2. Add a 1x6
girder and
another black
peg.
3. Add a 1x4 plate
to a 1x10 girder.
Add a black peg
to the end and
attach it to the
upper leg.
4. Lastly, add a
sloping 1x6
girder and 1x4
plate to the end
of the leg.
5. Repeat the
steps above
accept this time
add a 1x12 girder
at step 3.
Repeat these
steps in mirror
fashion to make
legs 5 and 6.

 

Leg 3


1. Make this
component
again...
2. Add a 2x3
plate and a
sloping 2x2
brick.
3. Make this
component out
of a 1x8 girder,
a 1x6 plate, and
two black pegs.
4. Add it to the
first component
as shown.
Add a 1x2
brick and a
2x3 plate.
5. Make this
component
using the
shown pieces...
6. and add it
the the above
component
7. Now add a
1x4 plate and a
black peg to a
slanting 1x6
girder.
8. Finish it by
adding a
slanting 1x3
brick, a 1x3
plate and a
1x2 plate.
9. Add it to the
bottom of the
leg to finish.
Repeat steps in
mirror fashion
to make the
6th leg.

Leg 4


1. Make this
component yet
again.
2. Add two black
pegs and a 1x6
plate to a 1x8
girder...
3. and add it to
the above
component.
4. Take a 1x12
girder.  Add a
black peg, and
two 1x6 plates.
5. Add this to
the above
component.
6. Again, take a
slanted 1x6
girder and add
a peg and a
1x4 plate.
7. Finish it by
adding a slanted
1x3 brick, a 1x3
plate and a
1x2 plate.
*Note* To save disk space,
I reused the above 2 pics.
The black peg belongs
on the other side of
the girder..
8. Add it to the leg.
9. Put leg 3
together with
leg 4 as shown
to form the
robot's right leg.
Legs 7 and 8
should be the
mirror image of
these and
complete
Arachnid's
left leg.

Legs 5, 6, 7, and 8 should be made in the mirror image of the above four legs.

 Whew!  If you made it though that,
the rest will be simple.


Arachnid Instructions Index
1. Legs 
2. Head
3. Arms
4. Body
  Transformation 

Index
Main Page
Guest Quarters
The Good: Guardians
Guardian Update!
The Bad: Destrons
 Destron Update!
The Ugly: Junkbots
Junkbot Update!
Instructions
 Tips and Tricks
The Ultra Throwbots
Links

 
 
 
 
 
 
 
 
 
 
Hosted by www.Geocities.ws

1