|
This instrument was designed for both function and, I think, beauty. I wanted an instrument that could lean against a table without falling over and could stay plugged into the amp without the cord being in the way. The shape of the body next to the player helps position the fretboard over the left knee. (I call it a "hip recess", my wife calls it a "gut cut".) The instrument is sized to allow easy reach of the controls and good playing position. It is built with a "neckthrough" design for maximum rigidity and with more stability from the laminated neck and a two-way adjustable stainless steel truss rod to help fight time and Mother Nature. The laminated neck also gives more decorative possibilities by using contrasting woods (Stripes). The "neck" on my dulcimers is because the excess body is not needed on a pure electric and would only add extra weight and bulk. (OK, so it ain�t traditional). Notice that the strap buttons are off center to give more control over position and stability on the lap and the string anchors are recessed so they won't catch on carpet, etc. The solidbody concept gives much more freedom of design to the shape of an instrument and the rigidity gives maximum sustain.
Standard Solidbody
� Mahogany, walnut or stained ash.
� Fretboard overlays of maple, or wenge.
� Rubbed oil- varnish finish.
� Quality tuners with matching pickup metal mounting ring, strap buttons, and knobs.
� Guitar type peghead.
� The bridge height is adjustable for your playing style.
� Soft case is included.
Guarantee: If you don't like it you may return it, undamaged, in the original packing material within 30 days for a refund. You pay shipping both ways. Call, e-mail, or write me first.
Note: Some custom instruments are not included. Another person may not like an inlay with a profile of your Aunt Sally either.
* Prices and specifications are subject to change on a whim. (And probably will.)
Dulcimer Concepts
Bill Buffington
1175 Vintage Way
Hoschton, GA 30548
(770) 868-0408
E-mail me at [email protected] |
|
