Materials Science Division,
Bhabha Atomic Research Centre,
Mumbai 400 085.
List of
Publications:
1. Single-phase diffusion study in b-Zr(Al)
A. Laik, K. Bhanumurthy and G.B. Kale
Journal of Nuclear Materials 305 (2002)124-133.
2. Intermetallics in the Zr-Al
diffusion zone
A. Laik, K. Bhanumurthy
and G. B. Kale
Intermetallics 12 (2004) 69-74.
3. Correlation factors in b-Zr(Al) phase
A. Laik, K. Bhanumurthy and G. B. Kale
Journal of Alloys and Compounds 372 (2004) 176-179.
4. Thermodynamic interdiffusion coefficients in ternary systems
G.B. Kale, K. Bhanumurthy, A. Laik, and S.P. Garg.
Transactions of the Indian Institute of Metals 57 (2004) 35-45.
5. On relating thermodynamic diffusion coefficients with phenomenological coefficients in binary systems
A. Laik and G.B. Kale
Transactions of the Indian Institute of Metals, vol.58, No. 1 (2005) 133-135.
6. Temperature dependence of vacancy wind effect in b-Zr(Al) solid solution
A. Laik, K. Bhanumurthy and G.B. Kale
Journal of Materials Science, vol. 40 No. 9-10 (2005) p.2615-2617.
7. Evolution of interfacial microstructure and strength properties in titanium-stainless
steel diffusion bonded transition joints
M. Ghosh, A. Laik, K. Bhanumurthy, G. B. Kale, J. Krishnan and S. Chatterjee
Materials Science and Technology, vol. 20 (2004) 1578-1584.
8. Diffusion processes in b-Zr(Al) phase : a thermodynamic approach
A. Laik, K Bhanumurthy and G. B. Kale
Bulletin of Materials Science, vol. 28, No. 3 (2005) 267-273.
9.
Microstructure and properties of a Cu-Ti-Co alloy
I. S. Batra, A. Laik, G. B. Kale, G. K. Dey, U. D.
Kulkarni
Materials Science and Engg (A), vol. 402 (2005) 118-125.
10. On
characterisation of wire-arc-plasma sprayed Ni on alumina substrate
A. Laik, D.P. Chakravarthy
and G.B. Kale
Materials
Characterization, vol. 55 (2005) 118-126.
11. Diffusion bonding
of commercially pure titanium to 304 stainless steel using
copper interlayer
S. Kundu, M. Ghosh, A. Laik, K. Bhanumurthy,
G.B. Kale and S. Chatterjee Materials Science and Engg. A 407 (2005)
154-160.
12. Out of pile
chemical compatibility of Pb-Bi eutectic alloy with
graphite
A. K. Sengupta,
R. K. Bhagat, A. Laik, G.B. Kale, T. Jarvis, S. Majumdar and H.S. Kamath, International Journal for Materials Research,
97 (2006) 834-837.
13. Interdiffusion studies between a Mo-based alloy and Ti
A. Laik, G.B. Kale and K. Bhanumurthy
Metallurgical and Materials Transactions A, 37A (2006) pp. 2919-1926.
14. Characteristics of interdiffusion between
17- 4 PH steel and nickel
A. Laik, P. S. Gawde, K. Bhanumurthy, G. B. Kale
Metallurgical
and Materials Transactions A, 39A (2008) pp.
733-741.
15. Novel method of evaluation of diffusion coefficients in Ti-Zr system
K. Bhanumurthy, A. Laik and G. B. Kale
Defect and Diffusion Forum, 279 (2008) pp. 53-62.
16. Diffusion in Cu(Al) solid solution
A. Laik, K. Bhanumurthy
and G. B. Kale
Defect and
Diffusion Forum, 279 (2008) pp. 63-69.
17. Diffusion reaction between Zircaloy-2 and Inconel
750X
A. Laik, P.S. Gawde, G. B. Kale and K. Bhanumurthy
Materials Science and Technology (Accepted)
18. Effect of microstructure on mechanical properties of
friction-welded joints between Aluminum alloys (6061,
5052) and 304 stainless steel
N. T. Kumbhar, A. Laik,
G. K. Dey, K. Bhanumurthy, J. Krishnan, D. J.
Derose, R. L. Suthar,
Ceramic Transactions 200 (2008) pp. 35-41.
1. Impurity Diffusion of Al in b -Zr
A. Laik, K. Bhanumurthy and G.B. Kale
Editor: P.K. De, Proceedings of the Symposium Zirconium-2002, 11-13 September 2002, BARC Mumbai pp. 393-397.
2. Algorithm for predicting diffusion paths in ternary systems
G.B. Kale, K. Bhanumurthy, P.S. Gawde and A. Laik
Editor: P.R. Prasad, Proceedings of Seminar on Computer Application in Metallurgy, 21-22 Dec 2002 BIT Sindri pp. 20-25.
3. Solid state bonding of 17-4 PH steel to nickel
G.B. Kale, A. Laik, P.S. Gawde and K. Bhanumurthy
Proceedings of TRANSMAT EXPO 2004, Intl. Conf. On Advancements in Materials & Processes for the Transportation Sector, 8-10 Nov, 2004 Mumbai.
4. Development of Ti-Al2O3 joints for application in linear accelerator tube assemblies
A. Laik, K. Bhanumurthy, A. L. Papachan, S.N.Athavle, A.K. Grover, G.B. Kale
Editor: V.S. Pandit, Proceedings of Indian Particle Accelerator Conference (InPAC-2005), VECC, Kolkata, 1-5 March, 2005. pp. 494-495.
5. Metallurgical
investigation of aluminium clad of Dhruva reactor
A. Laik and G. B. Kale
Proc. of Theme Meeting on 'High Burnup Issues
in Nuclear Fuel' (HBINF), Mumbai, Oct 2005, p. 111 -113.
6. Diffusion studies
in Nb-Al system
A. Laik, K. Bhanumurthy,
G.B. Kale
Proceedings
of International Conference on Materials Chemistry (ISMC-06), held at Mumbai on 4-8 December, 2006, pp.
129-131.
7. Friction stir welding of 6061 Al alloy and optimization of the
process parameters
N. T. Kumbhar,
K. Bhanumurthy, A. Laik, B. P. Sharma, R. L. Suthar, J. Krishnan, S.
Guha, T. L. G. Kutty, S. B.
Jawale
Proceedings of National Welding Seminar-2006, Chennai, 24-26 Nov, 2006 ,
pp. 65-70.
8. Interaction of D-9 cladding with static sodium
K. Ravi, A.K. Sengupta, A. Laik, G.B Kale, J. Banerjee and H.S. Kamath
Proc. of Sixteenth National Symposium on Thermal Analysis (THERMANS-2008)
Held at IGCAR, Kalpakkam on
9. Proceedings of
International Workshop on Hydrogen
Embrittlement in Metals
(HEM08)
Held at BARC, Mumbai, 18-20 February 2008.
Editors :
J. K. Chakravartty, R.N. Singh, A. Laik, K. V. Manikrishna
10. Effect of microstructure on mechanical
properties of friction-welded joints between
aluminum alloys (6061, 5052) and
304 Stainless Steel
N. T. Kumbhar, A. Laik, G. K. Dey, K. Bhanumurthy, J. Krishnan,
D. J. Derose, R. L. Suthar, S. K. Sahoo and
Proc. of the 15th International Conference on the Textures of Materials
(ICOTOM),
11. Interface reactions between alumina and stainless steel with Cu-Ti
alloy interlayer
A. Laik, K. Bhanumurthy, G.B. Kale, B.P. Kashyap
Eds. Meenakshi Sunder, A. K. Rajarajan,
G.P. Kothiyal; Proc. 53rd DAE Solid State Symposium, Dec 16-20, 2008,
Mumbai, pp. 991-992.
1. Diffusion reaction of Zr –1Nb with Si-Al-Ni (silumin) alloy
K. Bhanumurthy, G. B. Kale, P. S. Gawde, A. Laik, R.P.Singh and S. Banerjee
BARC Report No. BARC/2003/R/005.
2. 1S Aluminium Tube for Fuel Cladding of Research
Reactors - Correlation Between
Conductivity and Impurity Element Particles (FeAl3) Distribution
P.K. De, A. Laik, G.B.
Kale, I.S. Batra, R. Kumar and R.P. Singh
BARC Internal Report No. BARC/2003/I/017.
3. Interaction of lead-bismuth liquid alloy with graphite
R. K. Bhagat, A. Laik, A.K. Sengupta,
G.B. Kale, V.D. Pandey, S. Majumdar
and H.S.Kamath
BARC External Report No. BARC/2005/E/009.
4. “Compatibility of
different stainless steels in molten Pb-Bi eutectic
at high temperatures”
K.
Chandra, V. Kain, A. Laik, B. P. Sharma, S.
Bhattacharya and A. K. Debnath, BARC External Report No. BARC/2005/E/027.
1. Thermodynamic Interdiffusion Coefficients in Ternary Systems
G. B. Kale, K. Bhanumurthy, A. Laik, P.S. Gawde and S.P.Garg
Presented
on the 14th AGM, Materials Research
Society of India, held on 11 – 13 Feb,
2003 in BARC, Mumbai.
A. Laik, D.P. Chakravarthy, G.B. Kale
Presented on the 18th National Symposium on Plasma Science and Technology,
PLASMA-2003,
held on 08-11 December, 2003 at BIT Mesra,
3. Diffusion bonding of titanium and stainless steel using electrodeposited iron as an intermediate layer
P. Sengupta, A. Laik, A. L. Pappachan, A. K. Grover, G. B. Kale, and K. Bhanumurthy
Presented in Theme Meeting on Zirconium and Titanium Alloys held on Dec. 2003 in BARC, Mumbai.
4. Interdiffusion Between Silver and Stainless Steel 304
A. Laik, P. S. Gawde, K. Bhanumurthy and G. B. Kale
Presented in the Symposium Physical Metallurgy-
Research, Techniques and Applications, PMRTA-2004 held on December 2-3, 2004 at
BARC, Mumbai.
5. Fabrication of reflector modules for atomic research by electron beam welding
T. K. Saha, A. Laik, K. Bhanumurthy and A. K. Sinha
Presented in the Indian Institute of Welding International Congress 2005 held on 16-19 Feb 2005 at Nehru Centre, Mumbai.
>6. Solid state diffusion study between TZM (Mo-0.5Ti-0.1Zr) and Titanium
> A. Laik, G.B. Kale and K. Bhanumurthy
> Presented in 59th Annual Technical Meeting of Indian Institute of Metals, held at Chennai on 14-16, November, 2005.
>
>7. Microstructural assessment of aluminium clad through resistivity measurement
> A. Laik, I.S. Batra and G.B. Kale
> Presented in International Conference on Characterisation and Quality Control of Nuclear Fuels (CQCNF-2005) held at Hyderabad on 9-11 November, 2005.
>
>8. Interfacial structures and diffusion studies in solid state bonded TZM (Mo-0.5Ti-0.1Zr) specimens using multilayers
> K. Nitin, A. Laik, R.K. Fotedar and K. Bhanumurthy
> Presented in Seminar on Advances in Metallography and Microstructure (Microstructure2005) held at BARC, Mumbai on 1-2 December, 2005.
>
>9. Interfacial Microstructure and properties of Al/stainless steel, Cu/stainless steel Friction welded components
> J. Krishnan, D. Joyson, R.K. Panigrahi, K. Nitin, A. Laik, and K. Bhanumurthy
> Presented in Seminar on Advances in Metallography and Microstructure (Microstructure2005) held at BARC, Mumbai on 1-2 December, 2005.
>
>10. Solid state diffusion reaction in the Zr-Al system
A. Laik, K. Bhanumurthy, G.B. Kale
> Presented in the International Conference of Advances in Nuclear Materials, 12-16 December, 2006.
>
>11. Diffusion
in Cu(Al) solid solution
A. Laik, Preethi Natarajan, K. Bhanumurthy, G. B. Kale
Presented in 61st Annual Technical Meeting of Indian Institute of Metals, held at Mumbai on 13-16, November, 2007, pp. 319.
>
>
>12. Interdiffusion studies in Ti-Ag
system
P. S. Gawde, A. Laik and G. B. Kale
Presented in 61st Annual Technical Meeting of Indian Institute of Metals, held at Mumbai on 13-16, November, 2007, pp. 569.
>
>13. Development
of perforated plate matrix heat exchanger by solid state joining process
P. G. Adiga, A. Laik, K. Bhanumurthy, A. L. Pappachan, J.
Varshney, J. Krishnan, D. Joyson, R. L. Suthar, M. Goyal, Trilok Singh
Presented in 61st Annual Technical Meeting of Indian Institute of Metals, held at Mumbai on 13-16, November, 2007, pp. 204.
14. Interdiffusion in the Cu-Ti system
A. Laik, K. Bhanumurthy, G.B. Kale and B.P. Kashyap
Presented in National Symposium for Materials
Research Scholars (MR-08), IIT-Bombay, Mumbai, 17-18, May 2008.