With its industrial strength 12 gauge steel frame, 12 dots/mm print resolution and ability to accommodate labels up to 167 mm wide, the 170XiII is ideal for tough compliance labelling needs and mission-critical environments. Printing at speeds up to 203 mm per second, the 170XiII easily prints large volumes either on demand or in batches.

The 170XiII is easy to install, configure and operate with its multi-function front panel and multilingual LCD display. There is easy access to the printhead for maintenance.

View Zebra 170XiII

Printing Specifications
Thermal transfer or direct thermal
12 dots per mm resolution
Max. print width of 167.6 mm

Media Dimensions
Min. media width: 50.8 mm
Max. media width: 182 mm
Max. label length: 254 mm
Caliper: 0.07 mm to 0.3 mm
Label Roll Diameter: 203 mm
Core diameter: 76 mm

Media Sensors
Transmissive and reflective

Ribbons
Width: 50.8 to 175 mm
Max. outside diameter: 81 mm
Recommended to be at least as wide as media

Print Speeds
Max. 203mm/sec

Memory
Dual 32-bit RISC and CISC microprocessors
1Mb standard RAM (expandable to 9Mb)
PCMCIA card interface

Symbologies
Code11, Code39, Code93, Code128, Codabar, ISBT128, UPC-A/E, EAN-8/13, Postnet, EAN and UPC with 2 or 5 digit supplements, ITF, Standard and Industrial 2 of 5, LOGMARS, MSI, Plessey
2D Codes: CODABLOCK, PDF417, Code49

Communications
RS232/422/485 serial interface
High-speed Centronics compatible parallel interface

Physical
Height: 393.7 mm
Width: 336.5 mm
Depth: 490 mm
Weight (standard): 25.6 kg

Power
Auto-selectable 90-264VAC; 48-62Hz

Environment
Operating Temperature: 5ºC to 40ºC
Storage Temperature: -40ºC to 60ºC
Humidity: 20% to 85% non condensing

Options
Rewind (full label roll onto core)
Label Peel (full liner roll rewind)
Cutter (cuts full width media)
Expanded memory (up to 8Mb)