The newest thermal printer from Sato. It offers superb features and optional extras, including the ability to function as a purely stand alone unit when combined with the optional touch-screen or QWERTY keyboard.

View Sato DR300

Head Density
8 Dots/mm 

Print Method
Thermal Transfer/Direct Thermal

CPU
32-Bit RISC CPU

Print Speed
75, 100, 125mm/sec

Bar Code Type
UPC-A/EAN-8, EAN-13, Codabar, Code 39, ITF 2/5, Code 128, UCC/EAN128, Bookland

Bar Code Ratio
1:2, 1:2.5, 1:3 (Software defined)

Font Expansion
1-9 times (horizontally and vertically)

Font Type
(IBM 850 Code Set Table)
U, S, M, WB, OCR-A, OCR-B

Print Area
Max. Width 76mm x Pitch 356mm

Label Size
Width 25mm - 80mm
Pitch 19mm - 534mm (incl. label web)

Label Thickness
0.1mm - 0.26mm

Interface
RS232C (Ready/Busy, Xon, Xoff, Status-3)

Operational Panel
Key: LINE, FEED
LCD: 8 digits x 2 lines
Status: 2 colour LED (Red, Green)

Adjustment VR
Print Darkness, Print Pitch, Print Offset

User Mode
1. Print Darkness
2. Print Position Adjustment
3. Print Speed
4. Offset Adjustment

Features
Graphics print, Sequential Numbering, Line/Box, Print Position Adjustment, Back-feed, Tear Off, Calendar, Inverse Image, Zero Slash Selection, Non-standard code setting, Hex Dump, Customised design character (16 x 16, 24 x 24)

Self Check/Detection
Head Element Broken, Paper End, Ribbon End, Head Open, Memory Card Error, Test Print