Label printing has never been easier than with the SATO CX Series. This compact and flexible printer is available in both a 2-inch and 4-inch version, in direct thermal and thermal transfer models, and has a foot-print small enough to fit into the narrowest of workspaces. With both a parallel and a serial interface as standard, the CX Series is easily connected to most PCs and terminals. Additionally the CX Series can be used with a Smart Keyboard, creating a lightweight standalone printer, easily movable between the home, the office or the factory.

View Sato CX200

Print Method
Thermal Transfer and Direct Thermal

Ribbon
Max. length 140m wax, wax/resin, Max. length 127m resin
43mm max. roll diameter, Inner diameter 12.7mm, core length 108mm, two notches at either end

Print Density
CX208/108
8 dots (203 dpi)

CX212
12 dots (305 dpi)

Print Speed
40, 50, 75 mm/sec

Media
Roll or fan-fold die cut labels and tags, paper or synthetic, inside wound, Max. roll diameter 127mm on 38.1mm core

Maximum Print Length
CX208 - 513mm
CX212 - 245mm
CX108 - 1016mm

Minimum/Maximum Label Width
CX208/212 - 25 to 108mm
CX108 - 19 to 61mm

Minimum Label Length
9.5mm

Minimum/Maximum Label Gap
3mm to 25.4mm

Caliper
0.08mm to 0.18mm, 0.25mm only with qualified media

Sensors
Centre justified, see-through sensor for die-cut gap or notched media
Centre justified reflective sensor for I-Mark (movable)
Continuous material mode.

Interfaces
9-pin RS232C Serial and 36-pin Centronics parallel

Memory
512k total RAM, 512k flash memory

Barcodes and Fonts
EAN 8 and 13, ADD2, ADD5, Code 39, UPC A and E, Code 128A/B/C, EAN128, ITF, CODABAR, MSO, CODE 93, Postnet, 2D codes, MaxiCode, Datamatrix, PDF417

Sato internal fonts

Power
230V AC, 50/60Hz

Environment
Operating: 5 to 40°C
Storage: -20 to 50°C
Humidity: 25 to 85% RH non-condensing

Approvals
CE, TUV, FCC Class A. UL, CSA

Physical
CX208/212
178mm (H) x 178mm (W) x 254mm (D), Weight 1.6 kg

CX108
178mm (H) x 140mm (W) x 254mm (D), Weight 1.35 kg