Home | Our Products | Data Capture | Intermec ScanPlus 1800 

The ScanPlus model 1800 range of hand-held bar code scanners uses the latest patented technology and integrated design for fast and accurate contact and non-contact scanning. The ScanPlus 1800 scanners can be specified with one of two scan engines: CCD linear image scan engine for close reading applications (up to 10cm) or laser scan engine for applications requiring a longer range (up to 50 cm). The ergonomic design is comfortable to use and the hands-free stand provides yet more potential uses. The ScanPlus 1800 is a highly cost efficient and flexible solution for retail, office, healthcare and light industrial operations.

View ScanPlus 1800

General
A high performance and compact hand-held bar code scanner for retail, office, healthcare and light industrial applications. The ScanPlus 1800 can be configured with a CCD or laser scan engine.

Physical Characteristics
Length: 18 cm
Width at handle: 3.3 cm
Width at head: 6.4 cm
Weight: 145 g without cord (CCD), 165g without cord (Laser)
Case: High impact ABS self-extinguishing plastic. Rubber end cap and boot.

Performance
ScanPlus 1800 Short Range Scanner (with CCD engine)
Scan Rate: 400 scans per second maximum
Minimum X-dimension: 0.1mm
Depth of Field: 10 cm depending on code
Print Contrast Ratio: 25% minimum
Code Width: 12 cm maximum
Skew: ± 65º Pitch: ± 70º

ScanPlus 1800 Standard Range Scanner (with Laser engine)
Scan Rate: 36 scans per second maximum
Minimum X-dimension: 0.125mm
Depth of Field: up to 50 cm depending on code
Print Contrast Ratio: 25% minimum
Skew: ± 55º Pitch: ± 65º

Operator Feedback
Green good read LED, Adjustable beeper volume

Symbologies
All models: UPC E/A, EAN, Code39, ITF, Matrix, ITF, Code128, ISBT-128, Codabar, Code93, MSI, Plessey
Stacked codes: PDF417, Codablock (CCD engine only)

Interfaces
All scanners supported by: Wand & Laser emulation, single or dual RS232, IBM 46xx, OCIA and PC AT/PS2 wedge to over 400 terminals and PCs.

Features
Processor: Custom chip (ASIC inc. DSP processor) for fast signal processing and decoding.
Special routines for PDF417. Flash memory.

CCD Optics: CCD linear image sensor with sharp aiming beam. Long life red light LEDs.

Laser Optics: Visible laser diode @ 670 nm. Laser Class 2

Environmental
Operating Temperature: 0º to 40ºC
Storage Temperature: -25º to 60ºC
Relative Humidity: 10% to 90% non-condensing
Shock: withstands multiple drops of 1metre to commercial flooring.

Electrical
Power requirements: +5VDC ± 10% current consumption approximately 150mA, depending on configuration

Approvals
All models: Complies with FCC Part 15, CE Directives 89/336/EEC, 72/23/EEC and Low Voltage Directive EN 60647 (1995)

Laser version only: US DHHS Standard 21 CFR 1040, 10 and 1040,11 (1994 as a Class 2 laser product, IEC 825-1 (1993), EN 60825-1 (1994) Class 1