lab9

LAB # 9

Finding azimuth of trace line from bent conner area to staircase and azimuth of connected traverse loop.

North direction is assume datum.

Instrument

- Theodolite Telescope

- Telescope stand

- Tape

	1. Set up the theodolite over first station .Set 0 00' 00" at North then clockwise turned theodolite to the second station .Recording show data in sketching plan .
	2. At second station set 0 00' 00" from first station .Next clockwise turned theodolite to the third station .Doing followed direction until last station .
	3.Find the angle at the last station .Taping distance point by point.
	4. Sketching picture of close traverse working area from received data .Calculating azimuth of each lines.Calculating for error .