Return
Papers
Papers : 1)I.Masumoto,K.Tamaki and M.Kutsuna:On Surfer Hot Cracking of Weld Metal, Nagoya Univ.Memoirs of the Faculty of Engineering,Vol.21(1969)No.1, 2)I.Masumoto,K.Tamaki und M.Kutsuna: Uber den Einfluss von Schwefel auf die Warmrissigkeit im Schweissgut,ZIS Mitteilungen,Vol.12(1970)No.5,p624 3)I. Masomoto, K.Tamaki and M.Kutsuna:Cracking in Steel Weld Metal, Preprints of the 1st Intern.Symposium of JWS,Nov.1971,Tokyo, pIIA2 4)I.Masumoto,K.Tamaki and M.Kutsuna: Hot Cracking of Austenitic Steel Weld Metal,Jour.of JWS,Vol.41(1972)No.11,p1306 ....in Japanese 5)I.Masumoto,K.Tamaki and M.Kutsuna: Effects of Zirconium,Titanium and Manganese on Prevention of Hot Cracking of 3.5% Nickel Steel Weld Metal, Jour. of JWS. Vol.42(1973), No.4,p.333 ....in Japanese 6)I.Masumoto and M.Kutsuna : Sub-zero Welding Process (Report I), Jour.of JWS.Vol.42 (1973),No.3,p209 ....in Japanese 7)I.Masumoto and M.Kutsuna : Sub-zero Welding Process (Report II),Jour.of JWS.Vol.42 (1973),No.7, p648 ....in Japanese 8)I.Masumoto and M.Kutsuna : Sub-zero Welding Process (Report I),Trans. ofJWS.Vol.4 (1973),No.1,p104 9)I.Masumoto,K.Terai,S.Yamada and M.Kutsuna : Observation of fracture sur-face of TRC test specimens with scanning electron microscope, Trans. of JWS.Vol.6(1974),No.1,p3 10)I.Masumoto, K.Tamaki,M.Kutsuna and H. Ozaki :Einfluss der Primarkristal-lisation bei peritektisher Reaktion auf die Heissrissneigung von Stahl schweissgut, Schweissen und Schneiden,Vol.27(1975),No.11,p450 11)I.Masumoto,K.Tamaki,M.Kutsuna and H.Ozaki:De invloed van primaire kristalie gedurende peritectische reacties op de warmscheurneiging van staal lasmateriaal,Revue de la Soudure (Belgisch),Vol. (1975)No.2,p96 12)I.Masumoto,J.Takano und M.Kutsuna : Berechnung der Einbrand tiefe beim Elektronenstrahlschweissen, ZIS Mitteilungen,Vol.20(1978)No.12,p1197 13)S.Susei and M.Kutsuna : Energy Saving Welding Processes -E B Welding, Laser Welding, Plasma Welding,Friction Welding and Diffusion Bonding, Welding Technique,Vol.28(1980)No.1,p42 ....in Japanese 14)K.Masubuchi,K.Terai,S.Susei,M.Kutauna and H.Nagai : Current problems and future aspects in the application of high power EB welding,Intern.Conf.on Beam Technology by DVS, DVS Berichte,(1980)No.63,p60 15)S.Susei,M.Kutsuna,H.Nagai and A.Yamamoto :Electron Beam Welding of Steelfor Machine Structure Use,KAWASAKI Technical Report,(1980),No.75,p27 ....in Japanese 16)S.Susei, M.Kutsuna,S.Nakayama and T.Takeda : Study on Narrow Groove TIG Process for High Strength Steels, IIW-Document XII-B-290-80,(1980),July 17)S.Susei,S.Matsui ,M.Kutsuna and H.Nagai :The Application of Electron Beam Welding in Heavy Indusrtries, Proc. of Intern.Conf.on Welding Research in the 1980's,Osaka,Japan, 27-29,Oct(1980), 18)I.Masumoto,M.Kutsuna and K.Yasuda : Fundamental Study of High Power Electron Beam Welding (Report I)-Effects of Welding Parameter on Penet- ration Depth-,Jour. of JWS, Vol.50(1981),No.,p1095 ....in Japanese 19)I.Masumoto,M.Kutsuna and K.Yasuda : Fundamental Study of High Power Electron Beam Welding (Report II)-Effect of Beam Oscillation on PorosityElimination -Jour.of JWS, Vol.51(1982),No.1.p27 ....in Japanese 20)I.Masumoto and M.Kutsuna :State of the Art of High Power Laser MaterialsProcessing in US,Welding Technique,Vol.30(1982),No.8,p15 ....in Japanese 23)H.Kihara,F.Kanatani,S.Matsui,K.Yasuda and M.Kutsuna :Study on High Power Electron Beam Welding (Report I)-The Characteristics of High Power Electron Beam Welding- IIW Document IV-322-82,(1982),Sept. 24)I.Masumoto,F.Kanatani and M.Kutsuna : Study on Hot Isostatic Pressing to Heal Liquation Cracks in HAZ of Nickel base Superalloy Welds,Quartary Jour. Of JWS, Vol.1(1983),No.2,p181 ....in Japanese 25)I.Masumoto,M.Kutsuna and K.Yasuda : Fundamental Study of High Power Electron Beam Welding (Report III)-Effects of Welding Condition on Welding Distortion,Quartary Jour. of JWS, Vol.1(1983),No.2,p165 ....in Japanese 26)H.Kihara,F.Kanatani,S.Matsui,M.Kutsuna and K.Yasuda :A Study on High Power Electron Beam Welding (Report I)-Fusion Characteristics, Welding in the World,Vol.21 (1983),No.11/12,p296 27)I.Masumoto and M.Kutsuna : Algorithms to Calculate Penetration Depth and Cooling Time of Electron Beam Welding,Proc. of 31th Australian Welding Institute Annual Conference, Sydney, 16-21 Oct. 1983 28)I.Masumoto and M.Kutsuna :State of the Art of Materials Processing using Laser, Machine Research,Vol.36(1984),No.4 and No.5 ....in Japanese 29)I.Masumoto and M.Kutsuna : Study on Intersecting and Rotating Optical System of Divided Laser Beam,Proc. of 2nd Intern.Conf. on Joining of Metals, 15-19 April,1984,Helsinger (Denmark),p91 30)I.Masumoto and T.Shinoda and M.Kutsuna and T.Takemoto : Effect of Laser Beam Parameters on Weld Geometries,Quartary Jour.of0JWS.0Vol.2(1984),No.2,p246 in Japanese 31)I.Masumoto,M.Kutsuna,H.Iwata and T.Kawai :Study on Hardfacing of CuttingTips with Laser Beam,Proc.of Intern.Conf. on Quality and Reliability in Welding, 6-8 Sept.1984,Hanzhou,China, p. A-20-1 32)M.Kutsuna:Laser0Clading0of0Metals0and0Metal0Powders,Welding0Technique,Vol.32 (1984), No.8,p19 ....in Japanese 33)I.Masumoto and M.Kutsuna :Entwicklung und Anwendung der Kreuzungs-Rotations-Optik fur geteilten Laserstrahl,ZIS Mitteilungen,Vol.27(1985),No.3, p239 34)I.Masumoto,K.Masubuchi,and Members of HPL Committee : Research on MatelWorking Using High Power Laser,2nd Intern.Conf.on Beam Technology by DVS,DVS Berichte No.99,1985(Dusseldorf),p20 35)M.Kutsuna : State of the Art of Laser Processing in Foreign Countries, Jour.of JSTP,Vol.27 (1986),No.307,p949 ....in Japanese 36)M.Kutsuna : Fundamentals and the Applications of Laser Clading,Welding Technique,Vol.34 (1986),No.8,p57 ....in Japanese 37)I.Masumoto,M.Kutsuna and Chen Zhong Xiao :Some Special Structures of HAZ by Laser Beam Welding, Proc. of 3ed Intern. Conf. on Joining of Metals, 19-22 Dec.1986,Helsinger(Denmark),p256 38)I.Masumoto,S.Wignarajah,Y.Okumura and M.Kutsuna : Embrittlement of A 2 1/4 Cr-1 Mo Steel After 88,000 Hours Service at 540 C,Proc.of Intern.Conf. on Welding ,(Vol.1,p531), 12-14 Jan.1987,New Delli(India) 39)M.Kutsuna : Progress of Laser Materials Processing for Future,Welding Technique,Vol.35 (1987),No1,p.60 ....in Japanese 40)M.Kutsuna : Applications of Laser "Surface Modifications",Welding Technique, Vol.35(1987)No.8,p95 ....in Japanese 41)M.Kutsuna : The Trends of Research and Development in Laser Beam Technology in U.S. and Europe, Machine Technology,Vol.35(1987),No.14,0p26 ....in Japanese 42)M.Kutsuna and I.Masumoto : Improvement of Fatigue Strength of Welded Joints by Laser,Proc.of 4th Intern.Colloq. on Welding and Melting by Electron and Laser Beam, 26-30 Sept.1988,Cannes(France),p399 43)I.Masumoto,M.Kutsuna and M.Abraham :Study on Double Gas Shielded Metal Arc Welding (Report I), Trans of JWS,Vol.19(1988),No.2,p118 44)I.Masumoto,M.Kutsuna and M.Hasegawa : Effect of Laser Remelting of WeldToe on Fatigue Strength of Aluminium Alloy A5083P-O Welded Joint, Quartary Jour. Of JWS,Vol.6(1988) ,No.3,p420 ....in Japanese 45)M.Kutsuna : Application of Laser Materials Processing (Part 1 and 2),JITSUMU- TENBOU,No.126(1988,Nov. and 1989,Jan),p3 and p20 ..in Japanese 46)I.Masumoto,M.Kutsuna and M.Abraham :Study on Double Gas Shielded Metal Arc Welding,Proc.of 3rd China-Japan Symposium on the Science and Technology of Welding,17 -23 Dec.1988,Zhen jiang,China, p69 47)I.Masumoto ,M.Kutsuna , Chen Guo Guan,A.Kikuchi and H.Matsumoto :Effects of Laser Remelting on the Microstructure and Properties of the Plasma Sprayed Cr3C2-NiCrBSi Coatings,Proc.of 3rd China-Japan Symposium on the Science and Technology of Welding,17-23 Dec.1988,Zhen jiang,China.p52 48)I.Masumoto, M.Kutsuna,M.Abraham: Metal Transfer and Spatter Loss in Double Gas Shielded Metal Arc Welding - Study on Double Gas Shielded Metal Arc Welding (Report 1) ,Trans. Japan Welding Society,19-2,1988, 118-124 49)M.Kutsuna,M.Abraham : Metal Transfer and Spatter Loss in Double Gas Shielded Metal Arc Welding Using Flux-Cored Wire - Study on Double Gas0Shielded Metal Arc Welding (Report 2),20-1,1989,45-51 50)Y.Hosoi,M.Kutsuna and M.Abraham: Effect of Alloying Elements on Hot Cracking susceptibility of Fe-Cr-Mn Alloys Trans.of Japan Welding Society,22-1,(1991),p22-26 51)Y.Hosoi, M.Kutsuna and M.Abraham:Weldability of 12%Cr-15%Mn Austenitic Stainless Steei, Trans.of Japan Welding Society, 23-2,(1992),p.33-37 52)I.Masumoto, M.Kutsuna and K.Ichikaw:Relation between Process Parameters and Cut Quality in Laser Cutting of Aluminum Alloys, Trans.of Japan Welding,Society,23 -2,(1992) ,p.38-45 53) M.KUTSUNA and I.Asano: Laser Surface processing of Carbon Steel, Laser Research, Vol 10, (1992),p.1-13 in Japanese 54)Y.Hosoi, Y.Shimoide, M.Abraham and M.Kutsuna:Influence of tungsten,carbon and nitrigen on tougness and weldability of low activation austenitic high manganese stainless steels , Jour.of nuclear material, 191-194(1992),p.686-690 55)M.Kutsuna: Study of Laser Materials Processing using Beam Rotating Optical Device, 0Technical Report of Amada Research Fund, Vol.5(1992) 56)M.Kutsuna, J.Suzuki , S.Kimura AND M.Yuhki:CO� laser welding of A2219, A5083 and A6063 aluminium alloys, Welding in the World, 31-2,(1993),126-135 57)I.Masumoto, M.Kutsuna and Y.Honda: Study on Laser Surface Melting of Carbon Steels in Controlled Atmospheres ,Documents of Intern.Inst. Welding 43th Annual Meeting, (IIW Doc. IV-541-90) 1990, Motreal(Canada) 58) I.Masumoto, M.Kutsuna and Y.Honda: Study on Laser Surface Melting of Carbon Steels in Controlled Atmospheres, Proc. of 2nd Intr.Conf. on Power Beam Technology, 1990, Stratford-upon-Avon(UK)90, 59)I.Masumoto, M.Kutsuna and J.Suzuki: Laser Welding of A5083 Aluminum Alloys, Proc. of 5th Int.Symp.of JWS, May 1990,Makuhari(Japan) 60)I.Masumoto, M.Kutsuna and M.Abraham: Metal Transfer and Spatter Loss in Double Shielded MAG Welding Using Solid and Flux-cored wires, Proc. of 5th Int.Symp.of JWS, 1990, Makuhari(Japan) 61)I.Masumoto, M.Kutsuna and M.Abraham:Metal Transfer and Spatter Loss in Double Gas Shielded Metal Arc Welding Using Flux-cored Wire, Doc. of Intern.Inst.of Welding 43th Annual Meeting, (IIW Doc.XII-1193-90), 1990, Motreal(Canada) 62) I.Masumoto, M.Kutsuna and J.Suzuki: Laser Welding of A5083 Aluminum Alloy , Doc. of Intern.Inst.of Welding 44th Annual Meeting, (IIW Doc. IV-566-91), 1991,Hague(Holland) 63)M.Kutsuna and T.Arai : Development of Beam Rotating Device for CO� Laser Using Two Mobile Parabolic Mirrors,Proc. of LAMP'92,1992,Nagaoka 64)I.Masumoto, H.Yamazaki, S.Kimura and M.Kutsuna: Experimental Studies of Laser Metal Working , Proc. of 2nd GTE and DVS Joint Conf.,Budapest,June 1992 65)I.Masumoto, M.Kutsuna and K.Ichikawa:Relation between Process Parameters and cutting Quality in Laser Cutting of Aluminum Alloys, Doc. of Intern.Inst.of Welding 45th Annual Meeting, (IIW Doc. IE-144-92), Sept.1992,Madrid(Spain) 66)M.Kutsuna, S.Kimura, S.Sugiyama, S.Suzuki, M.Yuhkika and H.Yamaoka:CO� Laser Welding of A2219, A5083 and A6063 Aluminumu Alloys, Doc. Intern. Inst of Welding 45th Annua Meeting,(IIW Doc. IV-587-92), Sept.1992,Madrid(Spain) 67)M.Kutsuna and T.Arai : Development of Beam Rotating Device for CO� Laser Using Two Mobile Parabolic Mirrors, Doc. of Intern.Inst.of Welding 45th Annual Meeting, (IIW Doc. IV-588-92), Sept.1992,Madrid(Spain) 68)M.Kutsuna and A. Kikuchi:Thermal Cycles and Microstructures in Laser Welding of Carbon Steel, Proc. of ICALEO'92, Oct.1992, Orlando,USA, p103-110 69)M.Kutsuna and I.Asano : Laser Curburizing Using Beam Rotating Optical System , proc. of 5th CISFFEL,1993, La Baule,(France), p.489-496 70)M.Kutsuna :Study on Hot Cracking in Laser Welding of Aluminium Alloys, Proc. of 7th ISATA,1994, Aachen(Germany),p.427-434 71)S.Marya and M.KUTSUNA: Competitive Cost Effective Laser Material Processing in Mechanical Industry, Proc. of 7th Joining of Metals,1995.Helsinger(Denmark)p.294-306 72)M.Kutsuna: State-of-the-Art on the Use of Computor Aided Welding System in Japan , Doc . of Intern.Inst.of Welding 48th Annual Meeting, (IIW Doc.XII-1398-95) 73)M.Kutsuna and Y.Inami: Study on Surface Remelting of Aluminum Alloy Castings by CO2 Laser Using a Rotating Optical Device, Proc. of ICALEO'95,Nov.1995, San Diego,USA, p689-698 74)M.Kutsuna: Computer Aided Welding(CAW)System in Japan , Doc. of Intern..Inst.of Welding 49th Annual Meeting, (IIW Doc.XII-1472-96), 75)K.Kutsuna: Progress in Laser Applications in Industrialized Countries , Proc. of Conf.on New Horizon in Welding technology of MIT and AWS, Boston(1996.9. 26-27) 76)M.Kutsuna: Education and Training for Welding Personnels in Japan, Considering the International Scheme for Qualification of Welding Engineers, Journal of JWS,Vol.65,No.6 (1996),p.498-503 77)M.Kutsuna: Metallurgical Aspects in Laser Welding of Steels and Aluminum Alloys, Proc. of ICALEO'96,14-17 Oct.1996, Southfield,MI,USA, 78)M.Kutsuna and Q.Yan : Study on porosity formation in laser welds of aluminum alloys, Proc. of 6th Intn. Sysposium of JWS, 19-21 Nov.1996,Nagoya 79)M.Kutsuna, M.Abraham, Y.Kotani, K.Yamawaki and D.Hayashi:Development of Double Gas Shielded MAG Welding(D-MAG Proc.)characterized by low gas cost, less spatter and high productivity using Ar-He,Ar-He-0�, or Ar-O�as a inner shielding gas, Proc.of 6th Intn. Sysposium of JWS, 19-21 Nov.1996, Nagoya 80)M.Kutsuna:Education and Training Scheme of JICA Welding Technology Course, Proc. of 6th Intn. Sysposium of JWS, 19-21 Nov.1996, Nagoya 81)M.Kutsuna:Use of Photon Energy as a Laser Materials Processing in Indusries, Swedish Journal "Laaser Nytt" Special Issue, April,1997,p.1-24 82)M.Kutsuna and Q.Yan : Study on porosity formation in laser welds of aluminum alloys, Doc. of Intern. Inst. of Welding (IIW Doc. IV-683-97),San Francisco,July 15-18,1997 83)M.Kutsuna: Developments and Worldwide Penetration of Welding Technology, Doc. For China-Japan Joint Welding Meeting, Dalian,China, Nov. 26,1997 84)M.Kutsuna and Q. Yan: Study on porosity formation in laser welds of aluminium alloys (Report 1): Effects of hydrogen and alloying elements, Journal of Light Metal Welding and Construction, Vol.36(1998)No.2,p51-64 in Japanese 85)M.Kutsuna and Lu Zhen Yang: Electroslag Butt Welding of Steel Bar, Welding Technique, Vol.46-7 (1998),P.92-97 ・・・ in Japanese 86)M.Kutsuna and Q. Yan: Behaviors of hydrogen and Magnesium in Porosity Formation in CO2 Laser Welds, proc. of 6th CISFFEL,1998, Toulon,(France), p.223-231 87)M.Kutsuna, R.Kuno and T.Nakamura: Study on Laser Plate Bending of Stainless steels and Aluminum Alloys, Proc. of !st Taiwan Intern.Welding Conf., Sept.7-9,(1998), p.285-290 88)M.Kutsuna: Computer Aided Welding(CAW)System in Japan(Report II), Doc. of Intern..Inst. of Welding 51th Annual Meeting,(IIW Doc.XII-1551-98),Hamburg, Sept 12-17,1998 89)M.Kutsuna: Industrial Uses of Photon Energy as a Laser Materails Processing, Sinto Technical Report, No.18 (Oct.1998), p.1-13 90)M.Kutsuna and Q. Yan: Study on porosity formation in laser welds of aluminium alloys (Report 2): Mechnism of Porosity Formation by Hydrogen and Magnesium, Journal of Light Metal Welding and Construction, Vol.36 (1998)No112, p517-533 in Japanese 91)M.Kutsuna and K.Uetani: laser Welding of Ultra Low Carbon Steels, Proc. ICALEO'98, Nov 17-21.1998, Orlando,MI,USA, 92)M.Kutsuna and Q. Yan: Study on porosity formation in laser welds of aluminium alloys (Report 1): Effects of hydrogen and alloying elements, Welding International Vol.12- 12(1998) , p.937-949 93)K.Kim and M.Kutsuna: The State -of-the-Art of The laser materials Processing in Manufacturing, Journal of Korean Institute of Metal and Materials,Vol..12- No.2(1999),p.237-244 ・・・ in Korean 94)M.Kutsuna and abdel-Monem El-Batahgy: Comparison between GTA and CO2 Laser Welding of Duplex Stainless Steel, Journal of German Steel Research ( accepted )
