| Kens 93 SeaRay SeaRayder Jet Boat |
 |
 |
 |
 |
| Below are pictures of what is inside the ignition box. I hacked the cover off, then had to chip away at the potting material to expose all of the components. It looks like a collection of diodes, resistors, 3 small SCRs, 3 large SCRs, three transformers, and one large capacitor. Problem with taking off the potting material is that many components were damaged. I will tinker with this as time permits. |
| Email me with suggestions or help with IDing parts on the circuit board below. [email protected] |
| This page will be dedicated to troubleshooting the ignition system on the Sport Jet 90. It consists of an 1) ignition box, 2) stator that supplies the primary voltage, 3)trigger which tells the igniton box when to fire, and 4) the coils (one for each cylinder). Click here to go to my new page with detailed test procedures |
| There are two wires from the stator, these two wires plug into the "adaptor". There are two wires from the "adaptor", one is blue and the other is ground. The wires on the igniton box are as follows: Black is ground Blue is input from stator "adaptor" Red was used by previous stator, adaptor has made it obsolete and it is not plugged it White/black stripe is the trigger common Brown, white, and violet are the three trigger wires Green, Green/White, and Green/Red are the three wires leading to the coils |
| Links to parts suppliers for the Mercury Sport Jet www.seilermarine.com Sells Rapair switchboxes and stators www.stemtostern.com www.mercurypartsexpress.com www.outboardparts.com |