I used the DEI smart Windows 4 Module for clifford SmartNet
Install was easy but there is one trick - install guide all wires for passangers are on the lower left kick of the driver, remove the giant plug with a ratchet for easy install, then run the drivers wires into the door with the handy hole i found then read the noew below for the drivers window functions
here is where i put the units
here is the drivers door
This is where the catch is, this is actually wired wrong. The Wite wire that is listed as the "down" power for the drivers motor is actually not on this section of the door. If you look on the other side of the sheat metal on the upper right of the speaker you will see a little box that is the "one button down" module you want to use the white wire on this module to control the window down function for the alarm/smartwindows4
power window wire diag. from ford.
this is the passanger wire location
