
MOBILE INSTALLATION AVAILABLE $4,095 standard kit plus shipping and tax where applicable $350.00 DISCOUNT ON DIRECT SHIPMENT CUSTOMER INSTALLED KITS NO TAXES OUTSIDE NORTH CAROLINA 919-698-7388
|
The Voyager Convertible Kit:
Gives you 5 minute flexibility from 4 wheels to 2
The Voyager kit is like outrigger wheels that stabilize your bike.
Here's how it works:
The Voyager kit mounts onto your bike with a belly bracket that fits
onto the middle of your frame and two rear wheel axle brackets.
These three brackets stay on your bike when the Voyager frame is
removed.

You get a better feel for the road with the Voyager Kit. With the Voyager Convertible Kit attached to your motorcycle you will be able to lean 6-12 degrees, depending on the motorcycle attached to the Voyager Convertible Kit. A conventional trike has 0 degree lean into a turn because they have a solid rear end.
Cruiser motorcycles will lean 6 degrees and your larger touring motorcycles will lean up to 12 degrees. A regular two wheel motorcycle without a trike or a Voyager Convertible Kit attached will lean up to 45-60 degrees in a turn.
|
|||||||||||||||||||||
|
|
|
||||||||||||||||||||
Standard Kit
|
|||||||||||||||||||||
| The frame size listed for each bike is
recommended. You may choose to use a wider frame than listed for a
particular bike if you intend to go to a larger bike in the future, but the
wider frame will look wide on the bike that is intended for the narrower
frame.
Bikes that have two size frames listed would choose which frame to use according to whether you have side tour bags on the bike. |
|||||||||||||||||||||
| * If your bike is not listed, please call us at (919) 698-7388 for development information. | |||||||||||||||||||||
KIT ACCESSORIES AVAILABLE
