This page is intended for your use to guide you through the detailing process and product use.
1) Insure motorcycle is washed thoroughly. Use Cycle Wash for this application. Saturate the bike with Cycle wash, do not let wash dry on bike. Spray bike down with a shower of water and bring wash to a foam. Let stand approx. 2-3 minutes and then spray off with sharp stream. Do not forget the under-side of frame and fenders. Blow dry or shammi. 2) After bike is dry, now you use the Spray Shine and coat all areas of bike that are chrome and painted surfaces. You do not have to wait for shine to dry before wiping off. This will leave your chrome and painted areas protected from oxidation and most contact grime. 3) For all of you who have black coated surfaces, use Black Out to restore your black back to it's original state. This is the most popular product I have to date. Just use a 1" foam brush and a small amount of Black Out, and dab the brush into all black coated areas of bike. You will not believe the remarkable finish this will have on frames, motors, wiring harnesses, and anything black on the bike that is wrinkle or coated. After Black Out is applied just leave it. Your done with the most time consuming part of detailing your bike. 4) For those who run leather saddle bags. Take the Saddle Soft and spray onto the bags generously, with a lint free cloth, wipe the bags down. This will not shine the bags, but it will bring back the color and restore your leather to it's breathing state and protect it from further dry rot or weathering. You have all but completed your detail. Push the bike into the sun and walk around the bike to see all areas missed. You might be suprised! From the start of the wash to the very last wipe off of product you will have on the average worked 4 hours. The pay off with this product line is, the next time you need to clean your bike all you should have to do it take it to a car wash, spray it off real good, wipe it dry and it looks just like it did when you detailed it. All of the products I use are safe and leave a protective coating on the surfaces it is on.
I have other cleaning products for painted and plastic areas of bike, also, areas of pipes, natural finished areas, windshields, and areas of your paint that are scratched. Feel free to e-mail any of your questions! |
