| Lamp Lighting |
| G) Procedures of Lighting a Hurricane Lamp Inserting the wick � Step 1: Remove the wick holder from the lamp. � Step 2: Insert the wick into the wick holder � Step 3: Replace the wick holder and the cover. Refuel the lamp � Step1: Remove the cap of the paraffin container � Step 2: Pour the fuel into the container with the aid of a funnel. Screw backs the cap. Actual Lighting � Step 1: Lift the chamber holder and the chamber by pressing down the lever. � Step 2: Release the lever and regulate till there is no soot. (The flame is usually small) A) Distinguishing Procedure I) Method 1 � Reduce the flame to its smallest by turning the regulator in the anti-clockwise direction. � Press down the lever and lock it in its groove. � Blow off the flame from the bottom of the glass chimney. � Release the level. II) Method 2 Slowly turn the regulator in the anti-clockwise direction so that the flame becomes smaller and smaller until it distinguishes. B) To remove the wick holder � Press down the lever and lock it in its groove. � Loosen the wick holder and remove it from the kerosene container. C) To remove the glass chimney � Pull the hook on the top of the ventilator upwards. � Push the glass chimney out. � Remove the glass chimney from its holder |
 |
 |
 |
 |