Bludgeon Gloves
With the gloves what I did was that I measured the satin gloves that I would wear underneath so that I can get the inches right, so of like how you would do the meaturements for a sleeve of a sweater or coat (jacket as well). Then I taped the two pieces together so that it becomes one piece (the gauntlet or glove itself). See picture. You can make it with cloth patterns, use the pattern for sleeves.
<==   The inditation of the gauntlets/ gloves.
Here is a pattern for gauntlets. I would also cut in an inditation at the end so that your arm has free range to bend the albow. >>>>>
<<<  Here is a pattern for a sleeve. Remember to cut out a semi-circle to make an inditation for free range of bending the albow.
<<< Show an example of how the top and bottom of the strips look like,
                                   >>>>>>>>>>
A close up of the two.
\/ Below is the finish product \/
Back to Bludgeon main page
Hosted by www.Geocities.ws

1