What steps must occur for devices to communicate between different physical network segments? (Choose two.)

learning the IP address of the source device

obtaining the MAC address of the intermediate device

transferring the data packets from one network segment to another to reach the destination host

obtaining the IP address of the local host

Which of the following are major advantages of DHCP over BOOTP? (Choose two.)

It allows user to be mobile.

It does not require fixed profiles to assign IP addresses.

It requires only three packet exchanges to obtain an IP address.

It uses a table of static IP addresses developed by the network system administrator.

It requires the IP address to be linked with the same MAC address.

Which items may be included in a BOOTP packet? (Choose two.)

the destination IP address of a WAN workstation

the address of a router

vendor-specific information

the routing protocol of the destination network

What should a system administrator consider when assigning an IP address to a network server? (Choose two.)

Servers should have addresses assigned dynamically through a DHCP.

Servers with a dynamically assigned IP address would be difficult to locate on a network.

Servers with periodically changed IP addresses have little effect on a network.

Servers should have IP addresses assigned statically by a network system administrator.

Several solutions have been developed to expand the number of IP addresses available for public use. Which technologies are solutions? (Choose three.)

DHCP

classless interdomain routing

a new 64 bit addressing scheme

Network Address Translation

IPv6

IPv5

Which criteria identify a Class B address? (Choose two.)

decimal number in first octet between 127-191

decimal number in first octect between 128-192

decimal number in first octect between 128-191

first bit of binary IP address is 0

first two bits of binary IP address are 10

first three bits of IP binary address are 110

In the network shown in the accompanying graphic, where would it be appropriate to use private addressing ?

only area a

only area b

only area c

areas a and b

areas a and c

areas a and b and c

In what ways are the TCP/IP and OSI models the same? (Choose three.)

Both have an application layer.

Both have a physical layer.

Both assume circuit-switched networks.

Both have network access and data-link layers.

Both have similar transport and network layers.

Both assume packet-switched networks.

Within a company's TCP/IP network, failure to access e-mail on a remote server has been diagnosed as a network access problem. Which of the following could be the cause? (Choose two.)

DNS

PPP

ATM

TCP

SMTP

Ethernet

Which operations are performed by IP? (Choose three.)

routing packets to remote hosts

providing a physical addressing scheme

defining frames

defining packets

transferring data between the internet layer and the network access layer

transferring data between the internet layer and the application layer

Name the protocols that operate at the transport layer of the TCP/IP model. (Choose two.)

TCP

IP

UDP

FTP

NDS

IPX

Which of the following are TCP services? (Choose three.)

address resolution

end-to-end communication

flow control

reliability of data delivery

path determination

data representation

Which functions are handled by the TCP/IP application layer? (Choose three.)

logical addressing

encoding

logical topology

route selection

dialog control

data presentation

What version of IP was developed as IPng , and what year was it introduced by IETF? (Choose two.)

IPv4

IPv6

IPv8

1981

1992

2002

Which OSI layers relate to the network access layer of the TCP/IP model? (Choose two.)

transport

physical

session

network

data link

application

Which network device table contains the IP and MAC address of other devices on the same LAN?

DHCP

RARP

ARP

DNS

What is the function of the Reverse Address Resolution Protocol (RARP) on a local area network?

RARP binds a known IP address to an unknown MAC address.

RARP reports the MAC address of a website to the ARP table of the workstation.

RARP seeks out diskless workstations to assign a physical address to the network interface cards of the workstations.

RARP binds a known MAC address to an IP unknown address.

How do some computer operating systems prevent duplicate IP addresses on a local area network?

They are able to allow duplicate IP addresses on a single LAN segment.

The network DNS server reconciles IP address duplication.

They send ARP requests throughout a local area network.

They use UDP packets to bypass IP addresses.

Which model would a networking professional use to better understand the data communication process?

OSI model

IEEE model

ANSI model

Internetworking model

Which TCP/IP model layer supports both LAN and WAN technologies?

network access layer

internet layer

transport layer

application layer

Which layer is considered to be the host-to-network layer of the TCP/IP model?

application

presentation

transport

network access

data link

internet

Which of the following would be a function of ICMP?

It provides control and messaging capabilities.

It provides address resolution services.

It supports e-mail functionality.

It enables file transfer between hosts.

It allows remote login to distant hosts.

Which TCP/IP layer provides services that support a logical connection between the sending and receiving hosts?

application

network

IP

transport

presentation

session

What organization developed the TCP/IP reference model?

Internet Engineering Task Force (IETF)

National Intstitute of Standards and Technology (NIST)

Department of the Navy (DoN)

Department of Defense (DoD)

Massachusetts Institute of Technology (MIT)

Stanford University

What does the sending device need to communicate with another local IP host?

the IP address of the nearest LAN server

the MAC address of the destination device

the IP address and MAC address of the destination device

the IP address of the next hop switch