| My Samurai Build-up |
 |
 |
| I have cut the rockers out on both sides of the Sami. I have built new rockers out of 2x4 square tubing. I have capped the ends so water and debris will stay out. |
 |
 |
| I will be installing the new rockers at an angle. The other steel rockers I have seen have sat flat against the bottom of the door. I thought I would try something new. I think this will allow more protection to the body. You can see in the picture on the right side how the rocker will look once it is installed. (minus the ugly guy of course) :-) I will clean them up and paint them when they are finished. |
 |
 |
 |
| I have cut some mounting plates out of 3"x1/4" plate. I then used 1 1/8" shedule 40 pipe to mount the new rockers to the frame. I need to make a bracket for the front of my new rocker/sliders. I cannot use the pipe because the front floor sits lower that the rear floor. |
 |
 |
| Front----> |