Action and Reaction – Third type
The Secret of Radiating systems and the Basic Matter
Home Page- Secret of Nature
Click to go to – Action and Reaction
-Second Type
In the previous pages, we
saw two types of actions that explain mechanical and heat induced motion. The
third type is one where a left winding of the second type is accompanied
simultaneously by right winding force of the same type [second] in the ratio
4:3. [It also means that there should exist a recessive partner to the first to
create this force]. This winding has again a choice left or right and for every
left wound system there exist a right wound partner See Fig.-24 [ If the figure
is not opening click – sfig-24 ]
Here ‘A B’ is the active
force, which determines the winding direction, and ‘C D’ is passive force, which supports the winding. This type of winding can also occur on the
relative equilibrium system discussed in the second type.
Since the winding
pressure has non equilibrium on the two left and right frame, when it is pushed
to the third critical state of winding, it results into a system with two arms
in 4:3 ratio. These two arms contain 3/4 of the total matter. The other ¼ of
the matter is twisted in the opposite direction to the parent arms and takes
the shape of two more arms [daughter arms]. When the third critical point is
reached the daughter arms comes to lie beneath the parent arm. See Fig.-25. [
If the figure is not open click sfig-25 ] At the
critical point the ratio of centripetal and centrifugal force reaches the 3:1.
This ratio leads to the collapses of the system to the center. In the process,
¼ of the matter, which was caught with in the pair of bigger arms, is ejected
from the opposite side. The whole process is compression and expansion process.
The compression is accompanied by ejection of matter in one plane and is
simultaneously accompanied by sucking of matter on the second plane to regain
the state before compression. [We must not forget that all the systems are
linked because of the basic non-equilibrium. here we can imagine it as the
suction of the field which manifest as unwinding force on the external system].
The process is thus repeated endlessly. They can principally cause a
never-ending flow. The ejected matter because of the structure of the system
and the process of breakdown and emission has 3:1 ratio in the arms. The
emitted matter unwinds in a stepwise manner to gain 4:3 ratios and exist
flipping between two alternate states. The whole system spins and moves in
relation to the non-equilibrium in the ejected matter. See Fig. 26. [ If the figure is not open
click – sfig-26
]This is the basic matter by which nature
is made. We can look at it as charge, light, heat, or energy particle.
We
note that unwinding of the emitted matter takes place in three steps. We can
here imagine collision of these matters that leads to the formation of material
system and radiating system.
1] When the matter collide in the first order of
unwinding it results into radiating systems
2] When it collides in the second order of unwinding it
results in the relative equilibrium systems, which are amenable to winding and
unwinding. Here the number of matter, which collides, can lead to formation of
different types of matter particles. This explains the elements of periodic
table. The fact that they are formed in pairs left wound and right wound
explains the existence of elements in pair such as hydrogen H2 molecule. It
also explains why and how elements combine to form complex systems.
3] The matter in the third winding state adds or negates
the winding force of the external environment. In other words, it adds or
negates the external flux. [More about it will
be discussed later]
A Brief Review of the above Exercise:
Our thinking thus presents
to us three different types of action and reaction process. The first one accounts for the mechanical
motion. The second one gives us the picture of an atom as well as the heat
induced compression and expansion process.
The third type accounts for stellar and radiating systems.
The most important
point to be borne in mind is that, the first, the second and the third type of
action can be carried out on the type of system that results in the second
type. [Action and reaction on the second type of system is the action and
reaction we deal in our day to day life]
The mechanical
force is winding force on one the horizontal plane and unwinding on the
vertical plane vice-versa. Heat induced phenomenon’s are winding on the
vertical and horizontal planes of certainty plane unwinding on uncertainty
plane. The third is winding on both on certainty and uncertainty planes. Here the system
differentiates into a system that gives force to the environment on one plane
[certainty plane] and receives on the uncertainty plane vice -versa
The angle between the
dominant and recessive determines the efficiency of the force. Near to 45
degrees it is the most efficient above and below it the efficiency decreases.
The maximum is 67.5 and the minimum is 22.5 degrees. The fact that force can
exist as left or right winding means an absolute 45degree angle does not exist.
We must note that there is an orientation to the left or the right. So there is
nothing called a strict optimum angle. The root of uncertainty exists here. We
already noted that winding is a three step process. The fact that there is a
fundamental non-equilibrium invariably means the action of force starts at the
second ring from inside or second ring from outside See Fig.-27. [ Click here
if the figure is not open sfig-27 ]The
moment the winding or unwinding force touches the third critical point the
system breaks down.
The path the system takes is given in Fig.- 28 [
click here I the figure is not open – sfig-28 ]
In other words, it exists wound and linked up with
other systems as capable of winding and unwinding by a unit. When a system
winds or unwinds to readjust to the external force, it passes the
four-dimensional state temporarily. Each system thus
has three worlds, an inner world, an outer world and middle world. The inner
and outer world is linked by the middle world. When the outer world winds the
inner world winds in proportion and when the outer world unwinds the inner
world also unwinds in proportion. The full implication of the statement will flower on its own. For
the present, let us forget these worlds.
If the force applied at the
critical point is more than the required magnitude to take it to the third
critical state then the system is displaced in proportion. In other words, the
unwinding process is slowed down. We are here visualizing a motion that could
fit to the mechanical motion we witness in nature. E.g. kicking a football. The
external force applied here is released back to the outside on the opposite
side.
Click here to go to – Secret
of Relative Motion
Click here to go to Home page – Secret of Nature