 |
 |
| T25 PROJECT |
| PASSENGER SEAT |
 |
| Take the seat out of the van,what you need to do is take the runners of the seat by undoing the four alan bolts,also you need the leaver and connecting rod for allowing you to stop and move the runners backwards and forwards.The end of the rod near the plastic leaver on the outside of the runner needs to be bent down about 1/4inch, so when the top plate is in position it moves over the plastic leaver,Also any metal higher than the top of the runner needs to be cut down to the same height. |
|
 |
|
 |
 |
 |