The Tool Bench of Dr. Beez

Welcome to the tool bench.
     Here you will find a myriad of tools and techniques that I use to construct the armour and chainmaille that I work on. I'll also share some insight into what works and what does not. Some of the pictures, when clicked upon, will give you a closer view.

Tools
	Winding Rod This is a, 3/8" in diameter, metal rod with a small hole drilled through, 1" from one end. This allows wire to be fed into the hole to keep the wire from turning during "worming". The end of the rod is flattened slightly on two opposing sides.
	Winding Block This is a simple wooden block with a hole through the middle. The hole allows me to pass the winding rod through the hole and feed wire between the screws in the block next to the hole. The hole is just large enough to fit the winding rod through.