Jeff's firing system
(or something else when I think of a good name)

The firing system will consist of several Boxes. Depending on the setup, there can be a different set of boxes used.

The FireBox - All setups will use this box. The firebox is what ignites the cues.
The circuit board in all fireboxes will be the same, reguardless of the configuration.

The ControlBox - All FireBoxes will plug into a ControlBox. The ControlBox will be the only module that can talk to a FireBox. In small setups, the ControlBox will become the firing station, and won't require a MainPanel. In large setups, or where the firing station is going to be further away, the ControlBox will be plugged into a MainPanel. If the system is going to use RF, the control box will contain the receive module (or be hooked directly to it).

MainPanel - This is the control panel where large shows are shot from. This might also be a computer that's hooked up to a small box that talks to the ControlBox.