Jawed Ahsan
Cell #0092300-2336129
OBJECTIVE
An Engineering position.
SKILLS
Weld Inspection Material Inspection Dimensional Inspection
Blue Print Reading Material Testing Document Control
Codes/Standards Visual Inspection Electrodes Selection
Preparation of BOQ. Cathodic Protection NDT
Tank Inspection Piping Inspection WPS/PQR
Pressure Vessel Inspection Heat Exchanger Inspection Furnace Inspection
Material Selection Witnessing of WQT Hardness Testing
Sand Blasting/Painting Inspection Witnessing of Leak Testing Thickness gauging
Vender Inspection ISO-9000 Witnessing of PWHT
Integrity Management & RBI Condition Monitoring Review & Approval of drawings/Design
PROFESSIONAL DEVELOPMENT COURSES
ASNT Level-3 MT 2015
Basic Level Vibration Analysis (SKF) 2008 -
Authorized Pressure Vessel Inspector ( API-510) 2004.
( American Petroleum Institute)
Certified Welding Inspector Canadian Welding Bureau 2004 -
Level - 2 in Radiographic Testing (PAEC) 1997. -
Level - 1 in Ultrasonic Testing 2002 -.
Attended a Course on ISO - 9000 1996 -
VISITING COUNTRIES
So far visited Holland, Canada, Germany, China, France, UAE, Bahrain, KSA, , Belgium, Bangladesh, India, Oman.
UAE: One month In-service Inspection Training at BP Sharja ( 2005)
Netherlands: Dismantling of Ammonia Plant (2007-2008)
China : Inspection of material for Refinery Project (2009)
Bangladesh: Attended several Shutdowns/ Inspections during 2011-2014
UAE : Attended shutdown at Takreer Refinery 2013
Oman: Shutdown and RBI/Inspections at OmanLng 2014-2015
EDUCATION
Bsc ( Mechanical Engineering ) from NED University of Engineering and Technology in 1993.
Canadian Equivalency Certificate of Bsc (Mechanical Engineering)
Trainings:
Conducted Engg. trainings and lectures at NED University, Pak Arab Fertilizer, Moody International and Peoples Steel Mills on various topics i.e materials & Metallurgy, Welding, Corrosion, Inspection Techniques, API-510, ASMe Sec.VIII etc. Wrote Hand book of Physics for FSc Students.
HIGHLIGHTS OF QUALIFICATIONS
1). Over 20 years experience in Quality Assurance/Control and testing within the , Fabrication, Inspection, Installation & In-Service Inspection of Pressure Vessels, Heat Exchangers, Piping, Steel Structure etc.
2). Proficient in Non-destructive Testing relating to RT, UT, MT and PT
3). International experience with Clients i.e Babcock Wilcox Gama , Ansaldo, Marubeni, Mitsubishi etc.
4). Expertise in supplier quality control, source, receiving and first article inspection, quality contract audit, vendor evaluation.
5). ASME Section II,V,VIII,IX,API-650,API-653,API-1104, API-510,API-572,API-576 and ISO9001
6). Bsc. Mechanical Engineering Degree from NED University in 1993.
7). Valid certification of ASNT Level-3 MT, API-510 ,RT Level II, UT Level 2, CWB Level 1
8) Familiar with MS Office, AutoCAD 14 & Internet/ E mail.
SUMMARY OF EXPERIENCE
Dismantling of NH3 Plant in Netherlands.
Verification of Tag of Piping Spools & Equipment using P& ID & Line list.
Assessment of Life of Piping & Equipment by using replica, UT etc.
Measurement of remaining life of equipment.
Inspection of different valves, spools and observe packing.
Inspection of cut ends of spools.
1). In-service Inspection of Pressure Equipment.
Inspection of Pressure equipment as per API-510, performed basic pressure and thickness calculations for Pressure Vessels, Recommended repair Welding Procedures for defects in various Carbon Steel and Stainless Steel. Performed DPT & MT. Performed UT thickness readings. Failure investigation and fitness assessment of Pressure Vessels, Heat Exchangers, Tanks, Piping etc, External and Internal Inspection of Pressure Equipment, Risk based Inspection, Arranged Profile Radiography, UT Scanning, H Scanning of Furnace Tubes & Phased Array, Review of plant P&IDs/Drawings/inspection isometrics /integrity review documents, inspection planning, Inspection of on-going pressure vessels, Review & interpretation of inspection results, Evaluation of the long-term/short-term corrosion rates, assessment of remaining life & future inspection intervals, Recommendations to the owner/user, Inspection during repair of the heaters, review of welding procedures/parameters, non-destructive tests etc, Review of reports of advanced inspection techniques like IRIS, RFEC, Non Intrusive Corrosion Mapping, prepared inspection reports for columns, heat exchangers, heaters, tanks, pressure vessels, Familiar with activities related to flow line inspections, Inspection of flow lines, Familiar with the Well configuration, X-mas Tree Valves & piping related issues ,Familiar with activities related to calibration of pressure relief devices & calibration witnessing, General visual examinations & familiar with inspection techniques for the tanks
Steel Fabrication:
Expert in the inspection of Pressure Vessels, Heat Exchangers, Tanks etc.
So far Inspected hundreds of Pressure Vessels & Heat Exchangers.
2)Inspection
(a). Performed material inspection, Quality contract audit and Vendor evaluation for steel Pipes, Plates, Tubes, Forgings etc. went to suppliers’ premises to control the products quality before order issuing or product shipping;
(b). Carried out receiving, shop floor and site inspection for pressure vessel, piping and Steel Structure, related to visual quality, dimension, weld, assembly, material traceability, surface treatment, coating, packing and identifying.
3). Supervision
(a). Supervised quality management system, procedure implementation and document filing at boiler pressure vessel plant, jobsite and supplier premise;
(b). Oversaw fabrication process at shop floor or jobsite from raw material cutting, machining, welding, assembly, testing and coating to delivery packing ensuring adherence to quality requirements;
(c). Conducted pre-inspection meeting to carry out quality requirements, specification and ITP;
(d). Monitored, counted and reported the project progress.
(e). Arranged inspection, testing and heat treatment works.
4). Testing
(a). Witnessed pressure tests and mechanical performance tests for pressure vessel, Heat Exchanger;
(b). Operated non-destructive testing related to RT, UT, MT and PT.
5). Reviewing
(a). Reviewed and approved inspection and testing procedures, reports, Welding Procedure Specification and Procedure Qualification Record;
(b). Modified and enhanced quality requirements on drawings, specifications and contract documents so as to meet relevant standards, regulations and customer requirements.
6). Problem Solving
(a). Communicated with others to collect necessary information and tools;
(b). Found the way by self to fix the problems.
Cathodic Protection
Supervised and inspected Cathodic Protection Systems at Lahore International Airport Project, Adhi as Plant II and at Islamabad Airport Projects.
EMPLOYMENT HISTORY
Gravitas June 2016 to Till date
Manager Inspection
Tebodin – Oman LNG Sep 2014- May 2016
Inspection Engineer
Nespak Dec 2010 to Sep 2014
Sr. Engineer
4) Enar Nov 2008 to Nov 2009
Sr. QA/QC Engineer
5) Pak Arab Fertilizer Oct 2006 to Oct 2008
Section Head (Inspection)
6). Ranhill Sept 2003 to Sept 2006
Inspection Engineer
7). Nespak July 2000- August 2003
Sr. Mechanical Engineer
8). Sefec Engineering ( Pvt.) Ltd. Feb 1993 to June 2000
Quality Control Engineer.
PROJECTS
Worked on following Projects.
Shut Down April 2015 OmanLng (Oman)
Shut Down Bangora gas Plant Oct 2014 Tullow Oil ( Bangladesh)
Guddu Thermal Power Plant Project Client : Wapda
Shut Down Bangora gas Plant Nov 2013 Tullow Oil ( Bangladesh)
Shut Down Bangora gas Plant Oct-Nov 2012 Tullow Oil ( Bangladesh)
Shut Down Bangora gas Plant Oct 2011 Tullow Oil ( Bangladesh)
Inspection Of LPG Vessels by using Chime Boby Oil Field
Dismentling of NH3 Plant in Netherlands: Pak Arab Fertilizer
Adhi LPG/NGL Plant II Client : PPL
Turn Around 2005 Engro Asahi Plant Client : Engro Asahi
SHUT DOWN -2000 ICI PTA PLANT CLIENT: ICI Pakistan
FABRICATION OF LPG VESSELS CLIENT: National Refinery & SGS Ltd.
ENGRO ASAHI PVC PLANT. Client: Samsung (Korea) & Mitsubishi Corporation (Japan)
FABRICATION OF DOCK LIFT STRUCTURE: LLoyd’s Registered of Shipping
HABIBULLAH COASTAL POWER PLANT. :Babcock Wilcox Gama(Turkey) & Fiat Avio (Italy)
LIBERTY POWER PLANT PROJECT. Client : Ansaldo (Italy) & Siemens.
QAISAR LUCKY PETROCHEMICAL PROJECT. Client : Qaisar Lucky
DG KHAN CEMENT, MAPLE LEAF CEMENT CLIENT: F.L Smith (Denmark)
BINQASIM THERMAL POWER STATION : CLIENT :Marubeni Corporation (Japan)
1220 HUB POWER PROJECT Client : Ansaldo
Thar & Khairpur Sugar Mill Project