MC-505 System Program Version Up Disk (PNo. 17048669)

1998/07/29 (Wed)

System Version  : 1.07
System Build    : 118
Sum of CheckSum : 0F25

Directions for Installation.
[Please note that you will need to re-initialize the MC-505.
You should back up any data that you do not want to lose before
beginning the update]

**Warning**
DO NOT TURN OFF THE POWER ON THE MC-505 WHILE UPDATING OR
RE-INITIALIZING. IT COULD DAMAGE THE UNIT.
***********

1) Connect the MIDI OUT of an external sequencer to the MIDI IN
   of the MC-505.
2) While holding down TEMPO/MIXER, PTN SET, and PATCH, turn on
   the power.
3) Press ENTER.
4) Transmit the first Standard MIDI File from the sequencer
   (_000001.mid).
5) Continue transmitting until all 13 files have been played
   in order.
6) When the update is completed, a checksum will be displayed.
   Verify that the checksum value is correct.
7) Turn the power off.
8) Turn on the power while holding SHIFT, then press ENTER to
   initialize the unit and complete the update. Please note that
   initialization takes approximately 4 minutes.

[Contents]

Disk 1

@Readme.txt
_0000001.mid
_0000002.mid
_0000003.mid
_0000004.mid
_0000005.mid
_0000006.mid
_0000007.mid
_0000008.mid
(CheckSum : 68D3)

Disk 2

_0000009.mid
_0000010.mid
_0000011.mid
_0000012.mid
_0000013.mid
(CheckSum : 0F25)


Block  1 ( checksum = 96C5 )  => filename : '_0000001.mid'.
Block  2 ( checksum = 8C1F )  => filename : '_0000002.mid'.
Block  3 ( checksum = 8817 )  => filename : '_0000003.mid'.
Block  4 ( checksum = CFB5 )  => filename : '_0000004.mid'.
Block  5 ( checksum = 965D )  => filename : '_0000005.mid'.
Block  6 ( checksum = 4732 )  => filename : '_0000006.mid'.
Block  7 ( checksum = EF43 )  => filename : '_0000007.mid'.
Block  8 ( checksum = 2151 )  => filename : '_0000008.mid'.
Block  9 ( checksum = A3FB )  => filename : '_0000009.mid'.
Block 10 ( checksum = 7A5D )  => filename : '_0000010.mid'.
Block 11 ( checksum = 2CBD )  => filename : '_0000011.mid'.
Block 12 ( checksum = 039C )  => filename : '_0000012.mid'.
Block 13 ( checksum = 57A1 )  => filename : '_0000013.mid'.
