BeamSync for Visor 1.0b2

PDWhat is BeamSync for Visor?

  With this program, you can HotSync your Visor via InfraRed/
You need IrEhnancement package by Palm Inc, to user BeamSync. This program is Freeware. You can use it for FREE!

  This package contains following files

  readme-j.txt:Instructions in Japanese
  readme-e.txt:Instructions in English
@bsync-j.prc:BeamSync(Japanese Version)
@bsync-eprc:BeamSync(English Version)
 
2. How to install.

  First, Download IrEnhancement package. You can get it from http://www.palm.com/support/downloads/irenhanc.html (2000/8/15)

@Second, extract IrEnhancement. You'll get following files

   SerIrCommLib.prc
   SerialPanel.prc
   AMX.prc
   IrLib.prc.

 !!!! Caution !!!!
  After extraction, delete AMX.prc and IrLib.prc, If you install these files to Visor, You'll need Hard Reset
 !!!! Caution !!!!

 Third, Install following 3 files.

  bsync-e.prc
  SerIrCommLib.prc
  SerialPanel.prc

 After install, You'll asked to reset the Visor, Follow the instruction and reset Visor.

3. Setting

  Tap the home button and launch Prefs. 
  Choose "BeamSync" from the upper right corner and you'll see OFF/ON button. When you push ON button, BeamSync is active.

  If you can't see "ON" button, check the following.

@  SerIrCommLib.prc is not installed. -> Install it.
@  You didn't reset Visor after installation -> Reset it.

4. How to user

  Push ON button to activate BeamSync.
  Go to HotSync screen and push Local Sync to start HotSync via beam.
  When HotSync via beam start, message "BeamSync:Beam" will appear on the right upper corner. Please check it.

  If you want to HotSync via cradle, Method differs according to your cradle.

When using Serial Cradle

  Put the visor on Cradle and start HotSync, it'll use serial port automatically.

When using USB Cradle.

  Put the visor on Cradle and start HotSync pushing Up or Down button.When HotSync started, you can release the button.
  If you use Cradle more often than Beam, You'd better set BeamSync to off and set it on before HotSync via beam.


5.Restrictions

 This program is provided as is. There's no guarantee.
 Author have the copyright.
 Reverse engineering is not allowed.

6.Histories

2000/6/29 Version 1.0b1 1st release( Japanese version only)

2000/8/15 Version 1.0b2 Added English version
                        
7. Thanks

 Thanks a lot for the HandSpring people. Visor is really nice machine.
Especially I express special thanks for Rob Haitani who always trust me and give me a lot of helps.

2000/8/15
YAMADA Tatsushi Hacker Dude-san
http://www.tt.rim.or.jp/~tatsushi
mailto:yamada.tatsushi@nifty.ne.jp
