Here we will give you our best methods on constructing cherry bombs.
Method #1: Materials: 1 regular smoke bomb.
Plastic cement(optional)
3 in of Fuse, preferably visco, 4 in of white quickfuse
Powder, whistle mix, BP, or flash are good.
Hot glue or white glue.
Tape (optional)
Step 1: Light the smoke bomb outside.
Step 2: Once it is done widen the fuse hole, enough to put your powder in. (filling through a small hole can be boring just be patient) You can tape a paper funnal to it or whatever your method is. Remember to only fill it 2/3 - 3/4 of the way full.
Step 3: Secure the fuse with a glue or adhesive. I like to use Hot glue it seems to work well. You can put a layer of plastic cement or tape to re-enforce the casing, for a louder bang. You can also use sawdust and glue.( mix together until a paste is formed and use popsicle stick to spread) When you are done you can paint them to look more reallalistic.
Method #2: Materials: 1 crackle ball casing.
Tape, electrical or packing tape are good.
Glue, white or Hot glue are good(optional)
Powder, whistle mix, BP, or flash
3 in of Fuse, preferably visco, 4 in of white quickfuse
Step 1: Take the dragon eggs out of the casing. And fill 2/3 - 3/4 of the way full, with your powder of choice.(the casing should be able to come apart at the middle, for easy filling)
Step 2: slide the fuse into the already made fuse hole. You can use your glue to secure the fuse.
Step 3: Then tape with atleast 3-4 feet of tape or more if you see fit.
Method #3:
Materials: 1 ping pong ball
powder of choice
Tape (optional)
Fuse
Plastic cement(optional)
Step 1: Take the ping pong ball and poke a hole in it with a nail other sharp object.
Step 2: Take you powder and carefully fill the ball. This may take some time considering the size of the hole. (you can roll paper to look like a cone, a make shift funnel is born)
Step 3: After you have it filled 2/3 - 3/4 of the way. Put the fuse in the hole( it should fit very snug)
Step 4: Then you can either put plastic cement around the ping pong ball, about 1/4 of an inch thick. OR, you can wrap it evenly in tape.
Method #4
Material: 2 bottle caps
Tape
scissors
fuse
powder of choice
Step 1: Take one of the bottle caps and poke a hole for your fuse. optional: you can cut a slit on the side, in one of the caps to fit them together.
Step 2: Fill the bottle caps 2/3 - 3/4 of the way full with your powder.
Step 3: Put the fuse in, adn tape the caps together tightly. Using many feet of tape.