CLASS 5
HOT STOCK
A.) Titled and licensable
B.) TIRES: Max 38.5� No cutting allowed
Factory size numbers must be visible on tires
C.) ENGINES: Maintain 10� vacuum @ 800 RPM.
Single carburetor
No after market heads of blocks
No tranny brakes. If present MUST be disconnected and officials notified at line
No Magnetos
MSD or other after market ignition allowed.
Racing fuel or pump gas only � NO ADDITIVES OR EXOTIC FUELS
Open headers allowed. MUST exit under vehicle � max 3 � inch collector
Motor swaps allowed - but brands of engine and truck MUST be the same
Down sized vehicles with V-8 engine swap MUST be small engine block
Radiator, stock water pump & alternator required in stock location.
Battery relocation allowed MUST be securely mounted in battery box and all wiring MUST be secured and protected from chafing.
D.) BODY AND FRAME: Full stock body. Full stock frame.
i.e. Full size body on full size frame.
Must match manufacturer and production size
If factory hardtop is removed, vehicle MUST have 4- point roll bar
Full interior � including bench or 2-bucket seats, dash, door panels, windows, cranks, heater/defroster controls must be present
Windshield wipers and working lights
Functional flat beds allowed. Must be with in 2� of width of cab and Must be full length of unmodified frame. MUST be capable of supporting 500lbs at any point of perimeter.
Full glass. NO fiberglass replacement parts
Fuel cells allowed in stock location or between frame rails
Open top vehicles MUST have roll bar
NOTHING mounted in box
E.) SUSPENSION: Full OEM style suspension
Lift kits allowed
Ladder / traction bars allowed
4 wheel hydraulic brakes required