|
|
The equipment for oil/gas-well cementation operations.
1. Top cementing plugs.
2. Transitional separating elements with rubber-metal
protectors.
3. Threading plates РГ-42 Т15К6.
1. Top cementing plugs.
Dear sirs!
We call attention to you the large assortment of top cementing plugs,
which are produced by our company. Distinctive feature of our articles
is top cementing plugs guaranteed execution of its technological
functions.
The plugs intend:
- For usage at cementation of wells both through casing, and through the
tool;
- For reagents delivery in the necessary place of well through oil well
tubing at holding technological operations on producing horizons
stimulation;
- In any other cases, when it is necessary to divide fluids , conveying
under pressure in pipes, hermetically.
Top cementing plug is made as hollow cylindrical ball from multylayer
material with a special armoring. It is covered with antifriction plating.
This coverage protects a plug from mechanical damages.
The impermeability is ensured with overpressure creation in plug internal
volume. This operation is fabricated after setting an article in cementing
casing head ,pipe and so forth.
The top cementing plugs batch is completed by a manual hydraulic pump.
Besides the top cementing plugs, which are intended for operation in the
equal diameter pipes columns, we also produce transitional separating
elements, which ensure hermetic transition both from the greater diameter
to smaller one, as from smoller diameter to greater one.
The articles are steady against aggressive medium and do not create
problems at drilling out. By the order all articles are produced
tropicalized.
Look other characteristics in the operating characteristics table:
By your request we shall produce cementing and separating plugs of any
other sizes and purposes. Term of manufacture is up to 30 days from the
date of payment.
We call your attention to the following circumstance - all articles,
offered to you, have passed industrial trials and are used at the
enterprises of national joint-stock company "Oil-gas of Ukraine ".
The very high operating performances of this type separating plugs
are confirmed.
2. Transitional separating elements with rubber- metal protectors.
We set rubber-metal protectors on the
transitional separating elements of any standard size.
Press here to see its illustrations.
The installation is made by a method of a welding-on on the equipment
of our firm.
Apply to our e-mail on all purchasing questions, terms and prices
or call up
+380 (0562) 46-22-19
+380 (0562) 46-22-66.
3. Threading plates РГ-42 Т15К6.
We call attention to you threading plates РГ-42 Т15К6.
If you are interested in our offer - we'll provide you with
any complementary information.
Anatoly Dyakov
Telephone: +380 (0562) 462219, 462266.
E-mail: [email protected]
|
