Dashboard Polish

A highly protective non-smear polish based on long-life components, it cleans the surface leaving it looking shiny and new. Its water repelling properties offer unmatched protection from humidity and dust by forming a thin and transparent coating on dashboards, panels, plastics and all kinds of natural and artificial leathers.

A product that is particularly useful for professionals in commercial businesses, like car-wash stations, prestigious garages, coach builders and the nautical sector for instance.

Directions: Spray from about 20 cms. on the parts to be treated, wait for a few seconds and then distribute with a soft, dry cloth.

Glass & Crystal Cleaner

A quick drying, foam cleaner formulated with non-toxic components, designed to clean and degrease glass and crystal. it's strong, effective action removes stubborn dirt and grease, leaving surfaces without marks or streaks when dry. This easy-use cleaner may be safely used to also clean and shine crystal; mirrors; both optical and chromium-plated surfaces and porcelain.

Directions: Shake the container well before use, spray onto surfaces to be cleaned from about 20 to 30 cm., and then run with a soft cloth or absorbent paper. Repeat the operation until the surfaces are clean.

Multi-Functional Fluid

Acts as a releasing agent, lubricant, protective, polisher and water repellent.

Releasing: Efficient releasing agent that permeates through capillary action, allowing the rapid release of surfaces that have seized together.

Lubricant: Long lasting lubricant due to its formulation of special oils and hydrocarbons.

Protective: Acts as a surface protective against corrosion and oxidation through fine surface film it forms.

Polisher: Can be used as a polish on almost all clean surfaces, leaving a glossy finish.

Water Repellent: A very low surface tension and adhesive characteristics allow it to repel humidity, making it ideal as a water repellent for use with electrical contacts, thus ensuring a reduction in false contacts.

Especially for polluted environments like seashores, industrial areas etc.

Directions: Spray from about 20 cms. on the part part to be protected / lubricated / loosened. Wait for a few seconds and then loosen.

Multi Purpose grease for rotating surfaces

This product is based upon a combination of special greases and synthesized linear polymers to produce a protective, resistant lubricant. It protects surfaces against acidic or alkaline corrosion, and the effects of sea water. Formulated for use on chains; ropes; gearing joints and submerged parts in the mechanical; nautical and aeronautical industries. Especially good for bike-chains and other industrial applications where chains / sprockets / clutches are exposed to air.

Directions: Spray from about 20 cms. on surface to be treated.

Naturalizer - Air-conditioning Cleaner

A unique cleaning and protection product for all types of air conditioning systems, it combats growth of bacteria and mildew within air conditioning systems. This prevents unpleasant bacteria-containing odors from forming. Continuous and judicious use kills bacteria and germs and hence reduces chances of cold and other viral / bacterial infections.

Instructions for Use:

1) Insert the Naturalizer spraying tube and nozzle into the air inlet opening of the air conditioning and heating system. Then spray back and forth in all directions.

2) Allow at least 15 minutes for the spray to spread throughout the system, then operate system on lowest fan setting for 5 minutes. Use one aerosol can for each system to be cleaned. After this procedure, the cleaned, deodorized and hygienic system can be operated as usual.

Inflates And Repair

Inflates and repair enables the instant inflation and repair of a punctured tyre without having to remove the wheel.

Instructions for Use:

1) If possible, remove the cause of the puncture.

2) Rotate the tyre until the valve is at the bottom of the tyre. Insert the actuator into the valve until the tyre is inflated, then remove the actuator.

3) The vehicle can now be driven (at low speed).

4) Use of this product must be considered as only an emergency repair. As soon as possible, the punctured tyre should be professionally repaired or replaced.

Deoxidizer for Electric Contacts

An agent specifically formulated for cleaning and deoxidizing of any type of electrical contact, cable connections, cutout, batteries, ignition switches, electronic parts, integrated circuit boards and wherever you feel that a loose electrical / electronic contact exists. It acts by preventing the passage of electric current and the elimination of dissipation.

Directions: Switch off the main circuit before application and ensure that the electrical contact has been deactivated. Shake well before use. Spray the product on encrusted surfaces and then rub over with an absorbent paper. Wait for 15 minutes and ensure that the contacts are completely dry before switching on the concerned electrical equipment.

Concentrated Release Fluid

A deep acting, combined-action product, manufactured from low molecular weight chemical fractions, which loosen oxidized or unengaged surfaces. Operates to relieve incrustation and free metal seizures. Used as a lubricant and for protection of assemblies, preventing the development of rust and guaranteeing the perfect joining of the various constituent joints. For use as a protection agent and water repellent on screws, nuts, couplings, threads, hinges, car locks, motorcycles, industrial vehicles and mechanical equipment.

Directions: Spray from about 20 cms. on parts to be treated. Excellent de-jamming fluid if used before assembly of components.

Copper Lubricant

Copper Lubricant is an inert, ultra fine particle and friction-reducing lubricant, formulated to be used anywhere where permanent locking is caused through adverse temperature and corrosive conditions. It is water repellent, usable at temperatures from minus 30 degrees Celsius up to 1100+ degrees Celsius, and may be used on discharge header pivot's expansion joints, boiler inspection plugs or apertures, screw caps, thread connections and any other application where a durable lubricant is required.

Directions: Spray from about 20 cms. on to the parts to be treated.