Remove pinch bolt on shock/ fork assembly
Remove lower Fork bolt/nut
Remove upper mount bolts
Remove shock/spring assembly from car
Using a spring compressor relieve spring tension from upper mount assembly
Using a Allen wrench, and open end (14mm) wrench remove upper strut nut
Disassemble mount assembly noting the order of it?s components
If installing new shocks, transfer mount assembly, and springs to new shock
Bump stops should be cut in half
If installing new springs, decompress old springs and compress new
Reinstall upper mount assembly, be sure components are in exact order as stock
Reinstall upper strut nut
Loosely install upper mount bolts and reattach shock to fork
Install pinch bolt
Install Lower fork bolt
Install upper mount bolts
Torque all bolts to speck
Remove Shock to Lower Control arm bolt (14mm)
Remove upper mount bolts, and remove assembly from vehicle
See Steps 6-13��������������
