Post Graduate Theses guided by Dr. A. R. Mohanty at IIT Kharagpur 

M. Tech Theses (Completed)

1. Modeling and Simulation of Roller Bearing Dynamics*, L. S. Rajith, Jan 1998.

2. Prediction of Radiated Noise from Rotating Elements, S. Subramanya, Jan 1998.

3. Stress Analysis of a Horizontal Pressure Vessel Supported on Saddles, P. Madhusudan Rao, Jan 1998.

4. A study of stress Distributations in Axial Flow fan Components with a View to Optimize the sizes, S. Babu, Jan 1999.

5. Studies in Blast Noise Control, Y. sethya Rama Rao, Jan 1999.

6. A study on the Stress in same Automobile Bearings with a View to Optimize the Bearing Dimensions*, N.V. S. gupta, Jan 1999.

7. Application of Neural Network in Characterization of Ball bearing due to Manufacturing Imperfections*, Atanu Nath, Jan 1999.

8. A Design Data base for Acoustical Properties of Sound Absorbing Materials Available in India, K. Unmesh Pramod, Jan 200.

9. Use of short time Fourier Transform in Analyzing Faulty Ball Bearing Signals, B. S. Subrahmanyam, Jan 2000.

10. Effect of Engine Parameters on the Dynamic Response of a Sigle Cylinder Diesel Engine, M. G. Nagesh, Jan 2000.

11. Prediction of Acoustics Transmission Loss of Layered barrier Materials, B. Suresh umar, Jan 2001.

12. Design and Development of a Rotor Bearing Rig for Studies on Machinery Conditon Monitoring*, G. Baskaran , jan 2001.

13. Fluid Structure Interaction Analysis in Acoustics Using Finite Element Method, R. R. Mohanty, Jan 2001.

14. Experimental and Numerical Study of Damping effect on Structural Radiated Noise, Shwwetank Upadhyaya, Jan 2001.

15. Studies on Multi Cylinder Engine Dynamics, K. Narsimha Reddy, Jan 2001.

16. Rigid Body Dynamics and stress analysis of Cement Mill, Ganesh Pandit, Jan 2002.

17. Electrical Motor Current Signature Analysis of an Automobile Gear Box, Navin Kumar, Jan 2002.

18. Noise source identification and characterization using wavelet analysis, A. P. Siddhaye, Jan 2003.

19. Modeling and Prediction of Sound Absorption Quality of Sound Absorbing Materials, Bhagwat Singh, May 2004.

M. S. Thesis (Completed)

1. Multi Sensor based Online Condition Monitoring of Intelligent Manufacturing System*, Y. B. Ravi, 2002.

(Awarded First Prize in the VI Mantra Contest by National Instrument Inc., USA, 2001).

Ph. D Thesis (Completed)

1. Dynamic Analysis of a Rotor System for Detection of Crack and Coupling Misalignment*, S. Prabhakar, 2002.

M. Tech Theses (Under Progress)

1. In the areas of Duct Acoustics, D. Panda

2. In the areas of Tool Condition Monitoring, K. V. R. Subramanyam

(Collaboration with NUS under the IIT-NUS SEP programme)

3. In the areas of Acoustical Impedance, S. Saha

4. In the areas of Online ball bearing fault identification, V. K. Rai

5. In the areas of Structure-borne noise reduction, I. Panigrahi

Ph. D. Thesis (Under Progress)

1. "Gear box fault detection by motor current signature analysis, "C. Kar

(Receipient of Institute High Value Scholarship)

*Joint guidance