ELECTRICAL SYSTEM
HOME
  This is a permanent magnet altenator, usually refered to as a dynamo. It requires no 12V input to work, like a regular altenator.  This puts out 20 amps and weighs less than 4 lbs with its regulator & bracket (This saves over 3lbs compared to lightest altenator available).  It is off a John Deere mid size tractor (PN AM877557 & $168; /regulator is PN AM101406 $69.)  Kabota makes a similar one that is 3/4 lbs lighter & puts out 9 amps.  I am told dynnamos always  put out full amperage, so go with the smallest one possible. Later I will explore continuous full load issue.
  This is almost a bolt on conversion.  Mounting it's upper ear on the boss next to the water pump as shown, aligns it perfectly with the belt pulleys.  I machined an aluminum spacer for this upper ear to maintain a snug fit with the mounting bolt.  The bracket is made from a tempered bed frame.  It needs about a 3/4" spacer to go between it & the lower dynamo ear used for  recieving the bolt in the slot for adjusting belt. 
Front view
Hosted by www.Geocities.ws

1