Professor Ibrahim A. M. Abdel-Halim,
B.Sc., M.Sc. , Ph.D., FIEE
AWARDS
1- State Prize in Engineering  from the 
     Academy of Scientific Research and�
     Technology (Egypt), 1992.
2- Medal of Excellence� (First Class) from�
    The President of Egypt, 1995.
3- Esteem Prize in Engineering From
    Zagazig University (Egypt), 2004.
MEMBERSHIPS
Fellow of the Institution of Electrical
Engineers (FIEE), London, England,
United Kingdom.
APPOINTMENTS HELD
1- Professor of Electric� Machines,
�Power Electronics�and Electric Drives,
since 1985�till now, Faculty of�
Engineering, Zagazig�University
(Benha Branch) Egypt.
2- Head of Electrical Engineering
Department: During the periods:
1981-1983, 1991-1995,  and 2000-2002,
Faculty of� Engineering, Zagazig
University (Benha Branch), Egypt.�
3- Chairman of the Electric�Machines
Standardization Committee, Ministry of�
Industry (Egypt), since 1990�till now.
4- Consultant of Electric Drives,�
since 1993 till now.�
5- Vice Dean for Postgraduate Studies
and Research, from 2002 till now,
Faculty of� Engineering, Zagazig
University (Benha Branch), Egypt.�
Email: [email protected]
LIST OF PUBLICATIONS
[Either Single Author or Principal Author]
(1)�"Modelling Induction Motors For Computing Transient Behaviour",
     Proc. IEE, Vol. 126, No. 4, April 1979, pp. 343-344, England.
(2)�"Steady-state Performance of a Group of Induction Motors",
     Journal of Engineering and Applied Science, Cairo University,
     No. 3, 1979, pp. 289-299, Egypt.
(3) "Simple Method For Evaluating Induction Motor Performance Following Supply Interruption",�
     Journal of Engineering and Applied Science, Cairo University, No. 4, 1979, pp. 45-52, Egypt.
(4) "Simplified Analysis of The Single-phase AC Power Regulator For Series R-L Loads",�
     Journal of Engineering and Applied Science, Cairo University, No. 4, 1979, pp. 1-12, Egypt.
(5)�"Transient Performance of a Group of Induction Motors",
      Electric Machines and Electromech., Vol. 5, No. 3, 1980, pp. 187-199, USA.
(6)�"Exact Analytical Solution of Induction Motor Equations Following Supply Disconnection",�
     Electric Machines and Electromech.,Vol. 5, No. 4, 1980, pp. 323-330, USA.
(7)�"Computer-aided Analysis of Two Parallel Circuits Controlled by Thyristors",�
      Proc. of The Sixth Annual Operations Research Conference, 1980, pp. 85-93, Egypt.
(8) "Industrial Network Transients During Starting of Induction Motor Groups",
      Intelect. 80, International Elect. Congress, March� 1980, Egypt.
(9)�"Computing Current Harmonics and Power of Thyristor-controlled Inductive Loads",�
     Journal of Engineering and Applied Science, Cairo University, No.1, 1980, pp. 209-220, Egypt.    
(10) "Variable-speed Solution For Evaluating Transient Components Following Starting of Induction
         Motors", International Conference on Elect. Machines, Athens, September 1980, Greece.
(11) "Computing Transient Response of DC Motors Controlled by Thyristor Voltage Choppers",
�       Proc. of The Seventh Annual Operations Research� Conference, Feb. 1981, pp. 90-99, Egypt.
(12) "Modelling of Rectifiers in Single-phase Rectifier Circuits",
        International Conference on�Applied Modelling and Simulation, Lyon, September 1981,�
        pp. 162-165 , France.
(13)�"Analysis of Parallel Circuits Controlled by� Thyristors With a Weak Supply",�
       Journal of Engineering and Applied Science, Cairo University, No.1, 1981, pp. 239-246, Egypt.
(14)�"A Model For a Group of Induction Motors",
        Proc. of The Annual Operations Research Conference, Feb. 1982, pp. 765-770, Egypt.
(15) "Performance of Thyristor-controlled Universal Motors",�
        IEE International Conference on Elect. Machines, London, July 1982,� pp. 141-145 , England.
(16) "Fast Method For Computing Transient Torque of 3-phase Induction Motors",�
        International Conference on Applied Modelling and simulation,� Paris,� July 1982, pp.14-16, France.
(17) "Performance of Solid-rotor Induction Motor Controlled by Thyristors",
        International� Conference on Elect. Machines, September 1982,� pp. 518-521, Budapest, Hungary.
(18) "Time-constants and Frequencies of 3-phase Induction Motors Transient Components",
        Proc. of The Ninth Annual Operation Research Conference, Feb.� 1983,�pp. 133-141, Egypt.
(19) "Transient Performance of Inductive Load-Photovoltaic Converter� System",
        Proc. of The� Fourth IASTED International Symposium on Modelling and Simulation, June 1983,
        pp.301-303, Lugano, Switzerland.
(20) "Transient Components of Chopper-fed DC Series Motor",
        Proc. of The Fourth IASTED International Symposium� on Modelling and Simulation, June 1983,
        pp. 319-323, Lugano, Switzerland.
(21) "Effect� of Supply Reactance on The Controllable 3-phase Bridge� Rectifier Operation",�
        Proc. of The Third IFAC Symposium on Control in Power  Electronics and Electrical Drives,
        September 1983,�pp. 151-158, Lausanne, Switzerland.
(22) "Closed-form Analytical Solution of Rectifier and Controlled Rectifier Circuits Feeding Inductive Loads",
         AMSE Review, Vol.1, No. 1, 1984,�pp. 21-35, France.
(23) "Effect of Speed on Terminal Voltage of Thyristor-controlled Induction Motors",�
        Journal of Engineering and Applied Science, Cairo University, No.1, 1984, pp. 201-210, Egypt.
(24) "Approximate Equivalent Circuit For Small Solid-rotor Induction Motors",
        Proc. IEE, Vol. 131, No 2, March 1984, Pt. B, pp. 70-72 , England.�
(25) "Analytical Method For Evaluating Transient Performance of DC Series Motors",
        International Conference on Electrical Machines, September 1984, pp. 619-622,
        Lausanne, Switzerland.
(26) "Closed-form Solution of Thyristor-controlled Separately-excited DC Motors",
        International Conference on Electrical Machines, September 1984, pp. 875-878,
        Lausanne, Switzerland.
(27) "A Simple Analytical Solution For AC Thyristor Controller Feeding Two Parallel� Circuits",�
       Modelling, Simulation & Control, Pt. A , Vol. 4, No. 2, 1985,� pp. 57-63, France.
(28) "Performance Analysis of Parallel-connected Induction Motors Following Supply Disconnection",
        Proc. of The Tenth Annual Operations Research Conference, April 1985, pp.707-720, Egypt.
(29) "Transient Components of Inverter-fed Induction Motors",
        International Conference on Electrical Machines, September 1986, pp. 975-977,
       Munich, West Germany.
(30) "Transients of Ideal AC Supply Feeding 3-phase Thyristor Bridge With Inductive Loads",�
       Modelling, Simulation and Control, Pt. A, Vol. 16, No. 2, 1988, pp. 1-6, France.
(31) "Closed-form Solution for Load Characteristics of The Non-ideal Supply Fed 3-phase Thyristor Bridge",
        Modelling, Simulation and Control, Pt. A, Vol. 23, No. 2, 1989, pp. 53- 63, France.
(32) "Closed-form Solution For Supply Characteristics of� The Non-ideal Supply Fed 3-phase Thyristor Bridge",
         Modelling, Simulation and Control, Pt. A, Vol. 23, No. 39, 1989,� pp. 15- 25, France.
(33) "Closed-form Solution For Load Characteristics of 3-phase Thyristor Regulators Feeding Inductive� Loads",
        Modelling, Simulation and Control, Pt. A, Vol. 24, No. 3, 1989, pp. 41-49, France.
(34) "Simple Mathematical Expression For The Extinction Angle of 3-phase Thyristor Regulators Feeding
          Inductive Loads",
         Modelling,� Simulation and Control,� Pt. A, Vol. 24,� No. 3,1989, pp. 51-62, France.
(35) "Full Analysis of Performance of 3-phase Fully-controlled Bridge Rectifiers Feeding Static�
         Active Loads",
        etz Archiv, European Transactions on Electrical Power Engineering,� Vol. 12,1990, pp. 187-192,
        Germany.
(36) "Performance of Current-source Inverter Fed Induction Motor Under Field-orientation Control",�
        Proceedings of The Sixth Conference on Power Electronics and Motion Control, October 1990,�
        pp. 734-738, Budapest, Hungary.
(37) "State-variable Analysis of 3-phase Fully-controlled Bridge Rectifiers",�
        Modelling, Simulation and Control, Pt. A, Vol. 32,� No. 2,1991, pp. 53-62, France.�
(38)�"Analysis of Performance of 3-phase Fully-controlled Bridge Rectifiers Feeding a DC Motor",
        Modelling, Simulation and Control, Pt. A, Vol. 43, No. 2, 1992, pp. 1-13, France.
(39) "Transient Performance of VSI-Induction Motor System",
        Journal of Engineering and Applied Science, Cairo University, Vol. 39, No.6, 1992,�
        pp. 1237-1249, Egypt.
(40) "Effect of Instant of Switching on the Transient Performance of� VSI-Induction Motor System",
        Modelling, Measurement and Control. Pt. A, Vol. 48, No. 1, 1993, pp. 35-44, France.
(41) "An Equivalent Circuit For Small Solid-Rotor Induction Motors Fed From a Non-Sinusoidal Supply",
        ETEP Journal (European Transactions on Electrical Power Engineering),� Vol. 4, No. 3,
        May/June 1994,   pp. 237-241, Germany.
(42) "Performance of Three-phase fully-controlled bridge Rectifiers With Non-ideal Supply Feeding
          Static Active Loads",
        ETEP Journal(EuropeanTransactions on Electrical Power Engineering), Vol. 4, No. 4,
        July/August 1994, pp. 269-276,Germany.
(43) "Performance of a Three-phase Induction Motor Fed From a Nonideal Single-phase Supply",
        ETEP Journal (EuropeanTransactions on Electrical Power Engineering),� Vol. 5, No. 3,
        May/June 1995, pp. 215-220, Germany.
(44) "Closed-Form Solution of a Three-Phase VSI Feeding a Three-Phase Inductive Load",
        ETEP Journal (EuropeanTransactions on Electrical Power Engineering), Vol. 5, No. 4,
        July/August 1995, pp. 279-284, Germany.
(45) "Effect of Terminal Capacitors on The Transient Behaviour of a Group of Induction Motors",
        IEEE/IAS Conference, October 1996, San Diego, California,� pp. 2327-2332, USA.
(46) "Switching and Reswitching Transients of a VSI-Fed Induction Motor",
        Proceedings of the Fifth�International Middle East Power Systems Conference (MEPCON'97),
       1997, pp.281-285, Egypt.
(47) "Transient Performance of a Group of Induction Motors With Terminal Capacitors Following
         Supply Disconnection",
        Electric Machines and Power Systems Journal, Vol. 26, No. 3, 1998, pp. 235-247, USA.
(48) "A Simplified Approach to The Analysis of Short-shunt and Long-Shunt Self-excited Induction Generators",
          Proceedings of the Sixth International Middle East Power Systems Conference (MEPCON'98),
          December,1998, pp. 99-104, Egypt.
(49) "Effect of Cell Temperature on the Performance of a Photovoltaic Generator/DC Motor System",
        Proceedings of the Sixth International Middle East Power Systems Conference (MEPCON'98), 
        December, 1998, pp. 706-710, Egypt.
(50) "A Novel Approach for the Analysis of Self-Excited Induction Generators",
        Electric Machines and Power Systems Journal, Vol. 27, No. 8, 1999, pp. 879-888, USA.
(51) "Power Components and Power Factor of 3-Phase AC-DC Converters",
        Proceedings of the Seventh International Middle East Power Systems Conference (MEPCON'2000),
        March, 2000, pp. 16-21, Egypt.
(52) "Modelling and Simulation of VSI-Fed Induction Motors",�
        Proceedings of the Seventh International Middle East Power Systems Conference (MEPCON'2000),
        March, 2000, pp. 80-84, Egypt.
(53) "Performance Analysis of Switched Reluctance Motors",
        Proceedings of the Seventh International Middle East Power Systems Conference (MEPCON'2000),
        March, 2000, pp. 169-174, Egypt.
(54) "A Novel Approach For Steady-state Analysis of SEIG With Minimum Load Impedance",
        Proceedings of the Eighth International Middle East Power Systems Conference (MEPCON'2001),
        December, 2001, pp. 637-641, Egypt.
(55) "Performance of Wind Turbine Self-excited Induction Generator Systems",�
        Journal of Engineering and Applied Science, Cairo University, Vol. 49, No. 5, 2002,  pp. 897-911, 
        Egypt.
(56) "An Approach for Determination of the Parameters of a Photovoltaic Module ",�
        Engineering Research Journal (ERJ), Faculty of Engineering (Shoubra), Zagazig University
        (Benha Branch), No. 2, 2004, pp. 30-36, Egypt.
Hosted by www.Geocities.ws

1